How to Change the Oil in a 2017 Beta 250 RR Race
Shop parts for a 2017 Beta 250 RR Race Dirt Bike!
If you own a 2017 Beta 250 RR Race, regular oil changes are crucial for long-lasting engine performance and reliable shifting. The following step-by-step guide is tailored specifically for your MMY dirt bike and highlights everything of note about this model—including proprietary maintenance tips every dedicated MotoSport rider should know.
What Makes the 2017 Beta 250 RR Race Unique?
- This is a two-stroke, race-oriented model featuring a magnetic drain plug designed to capture metal debris and an oil system that seals with an O-ring instead of a crush washer, improving reliability and leak prevention.
- The factory manual recommends changing the transmission oil every 8–10 hours of ride time for maximum engine protection. Keeping a maintenance journal is a good habit for this MMY, ensuring consistent performance and longer-lasting components.
Required Supplies
- New transmission oil (Beta factory recommends high-quality 10W50 off-road-specific oil; follow owner's manual for capacity—typically around 800cc for this bike)
- 13mm socket or T-handle wrench
- Funnel
- Catch pan
- Clean rags
- Contact cleaner (for cleaning the drain bolt and surrounding area)
- Gloves
Step-by-Step Oil Change Instructions
- Warm up the engine briefly to help the oil flow out smoothly. Shut off the engine and place the bike upright and level, using a stand.
- Remove the skid plate, if equipped, for easier access to the drain bolt.
- Put on gloves. Position the catch pan under the engine, then remove the 13mm drain bolt located under the engine. Allow all oil to completely drain out.
Tip: Loosen the oil filler cap to vent the case and let the oil drain more efficiently.–see video demo of 250 RR - As oil drains, inspect and clean the magnetic drain plug using contact cleaner. Remove any metal particles stuck to the magnet—this is normal, but excessive shavings may indicate abnormal wear. Inspect the O-ring for cracks or distortion, replacing if needed.
- Once drained, reinstall the clean drain plug with a properly seated O-ring. Snug to manufacturer torque specs (do not overtighten).
- Using a funnel, add fresh oil through the filler cap. For the 2017 Beta 250 RR Race, the typical factory fill is 800cc of transmission oil.–confirmed by workshop instruction
- Reinstall the oil filler cap. With the bike upright and level, check the oil sight glass or check bolt (if equipped) to confirm correct oil level.
- Clean any spilled oil from the engine and skid plate area. Reinstall the skid plate.
- Start the engine, let it idle for a short time, then turn off and recheck oil level. Add oil if needed. Overfilling can harm seals; correct level is vital.
- Document your oil change in a maintenance log. Regular documentation helps catch issues before they become major problems.
Beta 250 RR Race Owner Tips
- Use only oil specified for two-stroke transmissions for Beta bikes to ensure the right clutch feel and gear protection.
- The oil plug's magnetic design is a simple but effective monitor for gearbox health.
- Frequent oil changes (every 8–10 hours of ride time) are ideal for racing conditions or extreme riding.
- Inspect the drain O-ring during every service and replace if pinched, hard, or torn.
Maintaining a proper oil change schedule is key to keeping your 2017 Beta 250 RR Race running at its peak – and with premium parts and expert advice available at MotoSport, your next ride is always ready.
Related Shopping Categories
Shop Motor Oil for a 2017 Beta 250 RR Race Dirt Bike!
Shop Oil Filters for a 2017 Beta 250 RR Race Dirt Bike!
Shop Oil Drain Pans for a 2017 Beta 250 RR Race Dirt Bike!
Shop Tools for a 2017 Beta 250 RR Race Dirt Bike!
Shop Oil Fillers and Drain Plugs for a 2017 Beta 250 RR Race Dirt Bike!
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.