How to Change the Oil in a 2016 Husqvarna TE250

Shop parts for a 2016 Husqvarna TE250 Dirt Bike.

Changing the oil on your 2016 Husqvarna TE250 is crucial for engine longevity and performance. This guide, proprietary to MotoSport.com, walks you through every step, highlighting the tools required and model-specific call-outs for your dirt bike.

Tools and Supplies Needed

  • Socket wrench set (for drain and filler bolts)
  • Flathead screwdriver (for removing and securing the oil filter cover)
  • Torque wrench (for reinstallation to spec)
  • Drain pan (to catch old oil)
  • Clean rags or shop towels (for cleaning up spills)
  • Replacement oil filter (OEM recommended)
  • New crush washer (recommended to replace during every oil change)
  • Engine oil (per manual, usually 10W-40 mineral or as specified for your climate)1,3,4
  • Funnel (for clean, precise filling)
  • Contact cleaner (optional, for cleaning surfaces)
  • Gloves (for hand protection)

Oil Change Interval

  • The recommended oil change interval is every 6,000 km (–about 4,000 miles) according to the owner's manual.3
  • If you ride aggressively or in severe conditions, consider changing the oil every 15 hours of riding or sooner depending on usage.1

Important Model-Specific Call-Outs

  • The 2016 Husqvarna TE250 has two plugs under the case. Only remove the correct oil drain plug; do not remove the smaller allen plug as specified in the manual. It's present due to the oil line drilling process during manufacturing and is not to be removed during regular oil changes.2
  • If you accidentally remove the wrong plug, don't panic—double-check the fluid level before starting the bike.2
  • Always refer to your owner's manual for the precise torque spec and oil capacity measurements. Incorrect tightening may damage threads or cause leaks.1,3
  • Use only the manufacturer-recommended oil (e.g., Bel Ray 10/40 mineral or Motorex full synthetic, as per your manual and climate conditions). Mixing oil types or using generic oil can compromise clutch and engine performance.4

Step-by-Step Oil Change Instructions

  1. Warm up your engine for a few minutes to allow the oil to thin out for better drainage.
  2. Turn off your bike and place it on a stable stand. Make sure the bike is upright and secure.
  3. Place your drain pan under the engine.
  4. Locate the correct oil drain plug (the larger of the two under the engine). Do not remove the smaller allen plug right next to it.2
  5. Use a socket wrench to loosen and remove the drain plug. Allow the oil to drain completely. Inspect the crush washer and replace if damaged or flattened.
  6. While the oil is draining, locate and remove the oil filter cover using a screwdriver or socket. Remove the old filter and wipe away remaining oil and debris from the filter cavity.
  7. Install the new oil filter, making sure it is seated correctly (with any O-rings or gaskets in place).1
  8. Clean and reinstall the oil filter cover. Tighten bolts to the specified torque.
  9. Reinstall the drain plug with a new crush washer and torque to specification to avoid stripping threads or causing oil leaks.
  10. Add new oil through the filler hole at the top of the case using a funnel. Refer to your manual for the exact capacity; check with the measuring cup to avoid overfilling.1,3
  11. Start the engine and let it run for a minute. Turn off and allow oil to settle. Using the sight glass or dipstick, double-check the oil level. If required, add oil until it reaches the correct level.
  12. Inspect for leaks around the drain plug and oil filter cover. Clean any residual oil from the engine case and frame.
  13. Dispose of old oil and filter at a certified hazardous waste collection center.

Additional Tips

  • Keep a maintenance log for your oil changes and track intervals.
  • If your drain plug is stripped or difficult to remove, avoid excessive force or heat to prevent engine case damage. Specialized extraction tools are available for stuck plugs.5
  • Always check for leaks after your first ride post-change.
  • If you ride in muddy or wet conditions often, oil changes should be more frequent.

Summary

Routine oil changes, performed with care and the right tools, will extend the life of your 2016 Husqvarna TE250. Always follow recommendations in your service manual, use correct parts and oil, and consult a professional mechanic if you encounter difficulties or uncertainties during the process.

Related Shopping Categories

Shop Motor Oil for a 2016 Husqvarna TE250 Dirt Bike.

Shop Oil Filters for a 2016 Husqvarna TE250 Dirt Bike.

Shop Oil Drain Pans for a 2016 Husqvarna TE250 Dirt Bike.

Shop Tools for a 2016 Husqvarna TE250 Dirt Bike.

Shop Oil Fillers and Drain Plugs for a 2016 Husqvarna TE250 Dirt Bike.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.