How to Change the Oil in a 2016 Husqvarna FE350HQ

Shop parts for a 2016 Husqvarna FE350HQ Dirt Bike.

Maintaining proper engine oil in your 2016 Husqvarna FE350HQ is crucial for performance and longevity. Below you'll find a step-by-step guide tailored specifically to this model, including all the tools you'll need, important model-specific notes, and expert MotoSport.com tips to ensure a smooth oil change every time.

Tools and Supplies Needed

  • Metric socket set: 8mm, 13mm sockets (ensure deep socket for drain bolt)
  • Half-inch wrench or ratchet
  • Needle nose pliers
  • Oil drain pan
  • New oil filter (refer to manual for specific part number)
  • New crush washer for drain bolt
  • 1.1 liters (approx. 1.1 quarts) of high-quality 4-stroke motorcycle oil (refer to owner's manual for recommended viscosity)
  • Funnel
  • Shop towels/paper towels
  • Contact cleaner (optional, for cleaning oil residue)
  • Service manual (for confirming torque specs and capacity)
  • Triangle stand or bike stand
  • Rubber gloves (optional, for mess-free handling)

Step-by-Step Oil Change Instructions

  1. Preparation
    • Warm up the engine for 1–2 minutes to allow the oil to thin and flow more efficiently, then switch off the engine and let it cool slightly for safer handling.
    • Place your bike securely on a triangle stand or bike stand, ensuring it's stable and upright.
  2. Locate the Drain Bolts and Oil Screen
    • On the 2016 FE350HQ, the primary oil drain bolt is underneath the engine. Use a 13mm deep socket for this bolt. There may also be a secondary drain bolt (typically 8mm) and a removable oil screen accessed with needle nose pliers.
  3. Drain the Old Oil
    • Position your oil drain pan beneath the drain bolt.
    • Carefully remove the primary drain bolt first, then the secondary drain bolt if equipped. Allow the oil to drain completely.
    • Use needle nose pliers to extract the oil screen (if present) and set it aside on a clean paper towel for inspection and cleaning.
  4. Clean Components
    • Inspect and clean the oil screen using contact cleaner or fresh oil, ensuring all debris is removed.
    • Clean the drain bolts and threads, and replace or flip the crush washer as needed.
    • Inspect the magnetic tip of the drain bolt (if equipped) for metal shavings—light debris is normal, but excessive buildup may indicate engine wear.
  5. Reinstall Drain Components
    • Reinstall the oil screen and torque it per the specification found in your service manual.
    • Reinstall both drain bolts with their respective washers. Tighten to manufacturer torque specs—do not overtighten to avoid damage.
  6. Replace the Oil Filter
    • Use the appropriate socket to remove the oil filter cover (typically 8mm bolts).
    • Remove the old filter, taking care as it may contain residual oil.
    • Pre-oil the new filter with fresh engine oil, then install it, ensuring correct orientation.
    • Reinstall the filter cover. Tighten bolts evenly and to spec.
  7. Add Fresh Oil
    • With the bike upright, insert a funnel into the oil fill opening.
    • Pour in the manufacturer-specified quantity of engine oil (for the 2016 FE350HQ, use 1.1 liters).
    • Replace the oil cap securely.
  8. Check Oil Level and Finish Up
    • Wipe away any spills with a shop towel.
    • Start the engine and let it idle for a minute. Shut it off and wait a few minutes for the oil to settle.
    • Check the oil level using the sight glass or dipstick; top off if necessary. Do not overfill.
    • Dispose of used oil and filter at an appropriate recycling location.

Model-Specific Call-outs for 2016 Husqvarna FE350HQ

  • The drain bolt size and location may differ slightly between sub-models. Always use the correct sized socket and never overtighten to prevent stripping the case.
  • This engine includes a removable oil screen; failing to clean or inspect it can lead to oil flow problems.
  • Tighten all bolts and the oil filter cover to the manufacturer's specified torque to prevent oil leaks and engine damage.
  • An oiled oil filter works more effectively—be sure to saturate your new filter before installation.
  • Only use high-quality motorcycle-specific oil; automotive oils may cause clutch issues.
  • Change your oil at least every 15 engine hours, or sooner if you ride in harsh conditions or race environments.

Tips from MotoSport.com

  • Lay out all tools and parts before starting for a faster and more organized oil change.
  • Avoid oil spills by using a large enough drain pan and shop towels—the 2016 FE350HQ can drain quickly once the bolts are removed.
  • Keep a log of oil changes for resale value and maintenance tracking.
  • If unsure of torque specs or oil type, always refer to your service manual or contact MotoSport.com technical support.
  • Properly dispose of all used oil and filters—never dump oil down the drain.

For more detailed parts and oil recommendations, as well as Husqvarna OEM supplies, visit MotoSport.com's Husqvarna FE350HQ maintenance section.

Related Shopping Categories

Shop Motor Oil for a 2016 Husqvarna FE350HQ Dirt Bike.

Shop Oil Filters for a 2016 Husqvarna FE350HQ Dirt Bike.

Shop Oil Drain Pans for a 2016 Husqvarna FE350HQ Dirt Bike.

Shop Tools for a 2016 Husqvarna FE350HQ Dirt Bike.

Shop Oil Fillers and Drain Plugs for a 2016 Husqvarna FE350HQ Dirt Bike.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.