How to Change the Oil in a 2016 Husqvarna FC350: A Comprehensive Guide
Shop parts for a 2016 Husqvarna FC350 Dirt Bike.
Changing the oil in your 2016 Husqvarna FC350 is one of the most crucial maintenance tasks you can perform to ensure peak engine performance and longevity. This proprietary guide by MotoSport.com is tailored specifically for the 2016 FC350, noting every necessary tool, step, and bike-specific tip you'll need to perform a successful oil change.
Tools and Supplies Needed
- Engine Oil (Check your owner's manual for the specific type and amount—generally 1.1 quarts or approximately 1.0 liter)
- New Oil Filter (Recommend using OEM or high-quality replacement filter)
- Oil Drain Pan
- 13mm socket and ratchet
- 8mm socket
- Torque wrench (for reinstalling drain bolts)
- Needle-nose pliers (for oil screen removal and cleaning)
- Funnel
- Shop towels or paper towels
- Contact cleaner (optional, for any spill cleanup)
- New drain plug sealing ring (recommended for a leak-free result)
- Triangle stand or lift stand (to keep bike upright and stable)
- Gloves
Model-Specific Call-Outs for the 2016 Husqvarna FC350
- The 2016 model has multiple drain plugs. The primary drain plug is located on the left side of the engine near the gear shifter. There are additional plugs beneath the case; do not remove the larger of the bottom case plugs as specifically instructed in the owner's manual. Only the designated oil drain plugs and oil screen should be removed for an oil change.
- Always check the torque specifications for all bolts in your service manual and make sure to observe torque limits to avoid stripping threads.
- Oil change intervals: Husqvarna recommends oil changes at regular intervals or after intensive riding. For the 2016 FC350, check your manual for the precise interval–racers often change oil every 10–15 hours of engine time, while casual users may stretch this further.
Step-By-Step Oil Change Procedure
-
Warm up the Engine
- Start your FC350 and let it idle for about 2–3 minutes. This helps the oil warm up and flow out more easily.
-
Place the Bike on a Stand
- Use a triangle or lift stand to keep the bike upright and stable during the procedure.
-
Remove the Oil Drain Plug(s)
- Locate the main drain plug on the left side near the gear shifter. Use a 13mm socket and ratchet to remove it. Allow the oil to drain completely into the oil pan.
- Locate the secondary drain plug (if equipped) beneath the case and remove it with the correct socket. Do not remove the unidentified larger plug directly on the bottom of the case, as this is not for oil draining purposes.
-
Remove and Clean the Oil Screen
- With needle-nose pliers, gently pull out the oil screen from its location. Place it on a clean towel and wipe away any debris. Inspect for metal shavings or unusual contaminants.
-
Remove the Old Oil Filter
- Locate the oil filter cover (typically secured by two bolts with an 8mm socket). Remove the bolts, then remove the cover and the old oil filter.
- Inspect the filter for metal fragments or unusual discoloration, which can indicate engine wear.
-
Install the New Oil Filter
- Lightly oil the new filter with fresh engine oil before installation—this ensures better initial lubrication.
- Press the filter into place and reinstall the cover, torquing the bolts to the specification found in your owner's manual.
-
Reinstall the Cleaned Oil Screen and Drain Plugs
- Reinsert the cleaned oil screen.
- Replace drain plug sealing washers (if applicable) to prevent leaks.
- Reinstall the drain plugs and tighten them to the specified torque setting.
-
Refill with New Engine Oil
- Remove the oil filler cap (on the right side of the engine) and place a funnel in the opening.
- Pour in the manufacturer-recommended amount of oil–usually about 1.1 quarts or 1.0 liter for this model.
- Reinstall the filler cap.
-
Check Oil Level and Inspect for Leaks
- Start the bike and let it idle for 1–2 minutes, then shut it off. Let the oil settle, then check the oil level using the inspection window or dipstick with the bike upright.
- Add more oil if necessary to reach the correct level.
- Inspect around the oil filter cover and drain plugs for any signs of leakage.
-
Dispose of Old Oil Properly
- Put used oil in a sealed container and bring it to a local recycling center or auto parts store with oil recycling services.
Additional Pro Tips for the 2016 Husqvarna FC350
- Always double-check the seating of the oil screen and filter to ensure proper oil flow.
- Use only high-quality engine oil that meets or exceeds Husqvarna recommendations.
- Replace the oil filter with every oil change for best engine protection.
- Consult your owner's manual for exact torque values and oil specifications.
- Keep a maintenance log as a record of oil changes—this can help with resale value and tracking engine health.
By following these steps specifically for your 2016 Husqvarna FC350, you'll ensure your machine gets the best possible protection and performance out on the track or trail.
This MotoSport.com guide is proprietary and tailored for your ride.
Related Shopping Categories
Shop Motor Oil for a 2016 Husqvarna FC350 Dirt Bike.
Shop Oil Filters for a 2016 Husqvarna FC350 Dirt Bike.
Shop Oil Drain Pans for a 2016 Husqvarna FC350 Dirt Bike.
Shop Tools for a 2016 Husqvarna FC350 Dirt Bike.
Shop Oil Fillers and Drain Plugs for a 2016 Husqvarna FC350 Dirt Bike.
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.