How to Change the Oil in a 2014 Can-Am DS250

Maintaining your 2014 Can-Am DS250 is crucial for ensuring its longevity and performance. One of the most important maintenance tasks is changing the oil. Regular oil changes keep your engine running smoothly and efficiently. Follow this guide to change the oil in your DS250 and keep it in top condition.

Shop parts for a 2014 Can-Am DS250 ATV.

Tools and Materials Needed

  • Oil filter wrench
  • Socket wrench set
  • Drain pan
  • Funnel
  • New oil filter
  • 4-stroke engine oil (check your manual for specifications)
  • Rags or paper towels

Step-by-Step Guide

1. Warm Up the Engine

Start your DS250 and let it run for a few minutes. This warms up the oil, making it easier to drain. Be sure to turn off the engine before proceeding to the next step.

2. Locate the Drain Plug

Find the oil drain plug underneath the engine. Place the drain pan beneath it to catch the old oil.

3. Drain the Old Oil

Use a socket wrench to remove the drain plug. Allow the oil to completely drain into the pan. Once drained, replace the drain plug and tighten it securely.

4. Replace the Oil Filter

Use the oil filter wrench to remove the old oil filter. Before installing the new filter, apply a small amount of new oil to the rubber gasket on the top of the filter. This ensures a proper seal. Install the new filter by hand, tightening it securely.

5. Add New Oil

Remove the oil fill cap and use a funnel to pour the new oil into the engine. Refer to your owner's manual for the correct oil capacity. After adding oil, replace the fill cap.

6. Check Oil Level

Start the engine and let it run for a minute. Turn it off and wait a few minutes for the oil to settle. Use the dipstick to check the oil level, ensuring it is within the recommended range. Add more oil if necessary.

Important Notes for Can-Am DS250 Owners

The 2014 Can-Am DS250 is known for its reliability and performance. However, regular maintenance is key to keeping it in optimal condition. Always use the recommended oil type and change the oil filter with every oil change. Additionally, inspect the ATV for any signs of leaks or damage during the oil change process.

By following these steps, you can ensure your 2014 Can-Am DS250 remains in excellent working order, providing you with many more adventures on the trails.

Related Shopping Categories

Shop Motor Oil for a 2014 Can-Am DS250 ATV.

Shop Oil Filters for a 2014 Can-Am DS250 ATV.

Shop Oil Drain Pans for a 2014 Can-Am DS250 ATV.

Shop Tools for a 2014 Can-Am DS250 ATV.

Shop Oil Fillers and Drain Plugs for a 2014 Can-Am DS250 ATV.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.