How to Change the Oil in a 2013 Can-Am Outlander 500 DPS

Maintaining your 2013 Can-Am Outlander 500 DPS is crucial for optimal performance and longevity. One of the most important maintenance tasks is changing the oil. Regular oil changes ensure that your engine runs smoothly and efficiently. Follow these steps to change the oil in your Outlander 500 DPS.

Shop parts for a 2013 Can-Am Outlander 500 DPS ATV.

Tools and Materials Needed

  • Oil filter wrench
  • Socket wrench set
  • Drain pan
  • Funnel
  • New oil filter
  • 4 quarts of 5W-40 synthetic oil
  • Clean rags

Step-by-Step Guide

1. Prepare Your ATV

Ensure your ATV is on a level surface and the engine is cool. This prevents burns and ensures accurate oil drainage.

2. Remove the Skid Plate

Use a socket wrench to remove the bolts securing the skid plate. Set the plate and bolts aside.

3. Drain the Old Oil

Place the drain pan under the oil drain plug. Use the socket wrench to remove the plug and allow the oil to completely drain. Once drained, replace the drain plug and tighten it securely.

4. Replace the Oil Filter

Use the oil filter wrench to remove the old oil filter. Before installing the new filter, apply a small amount of new oil to the rubber gasket on the filter. Install the new filter by hand, ensuring it is snug but not overtightened.

5. Add New Oil

Remove the oil fill cap and insert a funnel. Pour in the new 5W-40 synthetic oil. The 2013 Can-Am Outlander 500 DPS requires approximately 3.1 quarts. Check the oil level with the dipstick and add more if necessary.

6. Reattach the Skid Plate

Once the oil is at the correct level, reattach the skid plate using the bolts you set aside earlier.

7. Check for Leaks

Start the engine and let it run for a few minutes. Check for any oil leaks around the filter and drain plug. If there are no leaks, your oil change is complete.

Important Notes for 2013 Can-Am Outlander 500 DPS Owners

The 2013 Can-Am Outlander 500 DPS is known for its robust performance and reliability. Regular maintenance, including oil changes, is essential to keep it running smoothly. Always use the recommended oil type and filter to ensure compatibility and performance. Additionally, inspect other components such as the air filter and coolant levels during your maintenance routine to ensure your ATV remains in top condition.

Related Shopping Categories

Shop Motor Oil for a 2013 Can-Am Outlander 500 DPS ATV.

Shop Oil Filters for a 2013 Can-Am Outlander 500 DPS ATV.

Shop Oil Drain Pans for a 2013 Can-Am Outlander 500 DPS ATV.

Shop Tools for a 2013 Can-Am Outlander 500 DPS ATV.

Shop Oil Fillers and Drain Plugs for a 2013 Can-Am Outlander 500 DPS ATV.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.