How to Change the Oil in a 2012 Can-Am DS90X
Maintaining your 2012 Can-Am DS90X is crucial for ensuring its longevity and performance. One of the most important maintenance tasks is changing the oil. Regular oil changes help keep the engine running smoothly and efficiently. Follow this guide to change the oil in your DS90X and keep it in top condition.
Shop parts for a 2012 Can-Am DS90X ATV.
Tools and Materials Needed
- Oil filter wrench
- Socket wrench set
- Drain pan
- Funnel
- New oil filter
- Engine oil (check your owner's manual for the correct type and amount)
- Rags or paper towels
Steps to Change the Oil
- Warm Up the Engine: Start the ATV and let it run for a few minutes. This helps the oil drain out smoothly by thinning it.
- Position the ATV: Ensure the ATV is on a level surface and turn off the engine. Secure it to prevent any movement.
- Locate the Drain Plug: Find the oil drain plug underneath the engine. Place the drain pan beneath it to catch the old oil.
- Remove the Drain Plug: Use a socket wrench to remove the drain plug. Allow the old oil to completely drain into the pan.
- Replace the Oil Filter: Use the oil filter wrench to remove the old oil filter. Before installing the new filter, apply a small amount of new oil to the rubber gasket on the top of the filter. Install the new filter by hand, ensuring it's snug but not overly tight.
- Reinstall the Drain Plug: Once the oil has fully drained, reinstall the drain plug and tighten it securely.
- Add New Oil: Using a funnel, pour the new engine oil into the oil fill cap. Refer to your owner's manual for the correct oil capacity.
- Check Oil Level: Start the engine and let it run for a minute. Turn it off and check the oil level using the dipstick. Add more oil if necessary.
- Dispose of Old Oil: Properly dispose of the old oil and filter at a recycling center or an appropriate facility.
Important Notes for the Can-Am DS90X
The 2012 Can-Am DS90X is a reliable ATV, but regular maintenance is key to its performance. Always use the recommended oil type & filter to ensure optimal engine health. Additionally, check for any leaks after changing the oil and address them immediately to prevent engine damage.
By following these steps, you can ensure your 2012 Can-Am DS90X remains in excellent condition, ready for any adventure you throw its way. Regular oil changes not only enhance performance but also extend the life of your ATV.
Related Shopping Categories
Shop Motor Oil for a 2012 Can-Am DS90X ATV.
Shop Oil Filters for a 2012 Can-Am DS90X ATV.
Shop Oil Drain Pans for a 2012 Can-Am DS90X ATV.
Shop Tools for a 2012 Can-Am DS90X ATV.
Shop Oil Fillers and Drain Plugs for a 2012 Can-Am DS90X ATV.
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.
