How to Change the Oil in a 2012 Arctic Cat DVX90
Maintaining your 2012 Arctic Cat DVX90 is crucial for optimal performance and longevity. One of the most important maintenance tasks is changing the oil. Regular oil changes ensure that your engine runs smoothly and efficiently. Follow this guide to change the oil in your DVX90 and keep it in top condition.
Shop parts for a 2012 Arctic Cat DVX90 ATV.
Tools and Materials Needed
- Oil filter wrench
- Socket wrench set
- Drain pan
- Funnel
- New oil filter
- Engine oil (check your owner's manual for the recommended type and amount)
- Clean rags
Steps to Change the Oil
- Warm Up the Engine: Start the ATV and let it run for a few minutes. This helps the oil to flow out smoothly when you drain it.
- Position the ATV: Ensure the ATV is on a level surface and turn off the engine. This prevents any accidental movement and ensures complete drainage of the oil.
- Locate the Drain Plug: Find the oil drain plug underneath the engine. Place the drain pan beneath it to catch the old oil.
- Remove the Drain Plug: Use a socket wrench to remove the drain plug. Allow the old oil to completely drain into the pan.
- Replace the Oil Filter: Use the oil filter wrench to remove the old oil filter. Before installing the new filter, apply a small amount of new oil to the rubber gasket on the top of the filter. This ensures a proper seal.
- Install the New Oil Filter: Screw the new oil filter into place by hand. Do not over-tighten.
- Reinstall the Drain Plug: Once the oil has completely drained, reinstall the drain plug and tighten it securely.
- Add New Oil: Using a funnel, pour the new engine oil into the oil fill cap. Refer to your owner's manual for the correct oil capacity.
- Check Oil Level: Start the engine and let it run for a minute. Turn it off and check the oil level using the dipstick. Add more oil if necessary.
- Dispose of Old Oil: Properly dispose of the old oil and filter at a recycling center or auto shop.
Important Notes for the Arctic Cat DVX90
The 2012 Arctic Cat DVX90 is a reliable ATV, but regular maintenance is key. Always use the recommended oil type & capacity to avoid engine damage. Check for any leaks after changing the oil and ensure all components are securely fastened. Regularly inspect the air filter and replace it if necessary to maintain optimal engine performance.
By following these steps, you can ensure your 2012 Arctic Cat DVX90 remains in excellent condition, providing you with a smooth and enjoyable ride every time.
Related Shopping Categories
Shop Motor Oil for a 2012 Arctic Cat DVX90 ATV.
Shop Oil Filters for a 2012 Arctic Cat DVX90 ATV.
Shop Oil Drain Pans for a 2012 Arctic Cat DVX90 ATV.
Shop Tools for a 2012 Arctic Cat DVX90 ATV.
Shop Oil Fillers and Drain Plugs for a 2012 Arctic Cat DVX90 ATV.
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.