How to Change the Oil in a 2000 Yamaha RT100

Shop parts for a 2000 Yamaha RT100 Dirt Bike.

Keeping your 2000 Yamaha RT100 in peak running condition means regular oil changes are a must. This robust how-to guide, proprietary to MotoSport.com, will walk you step-by-step through the oil change process, highlight tips specific to the RT100, and list the essential tools needed.

Tools & Materials Needed

  • Socket wrench set
  • Drain pan
  • Funnel
  • Rags or shop towels
  • Replacement oil (check owner's manual for specification; high-quality 2-stroke oil recommended)
  • New washer (optional, for drain bolt)
  • Torque wrench
  • Gloves (for safety and cleanliness)

Preparation

  • Run the bike for a few minutes to warm up the oil. Warm oil drains faster and more completely.
  • Ensure the bike is on a level surface and securely supported on its stand.
  • Gather your tools and replacement oil. For the 2000 Yamaha RT100, only use the oil amount recommended in your owner's manual and never overfill (use oil gradients or filler hole as a guide) .

Step-by-Step Oil Change Instructions for 2000 Yamaha RT100

  1. Locate the Drain Plug
    The RT100's oil drain bolt is typically found on the lower side of the engine, beneath the engine/crankcase area. Place the drain pan directly under this plug.
  2. Remove the Drain Plug
    Use the appropriate socket wrench to carefully loosen and remove the drain plug. Allow the oil to drain completely.
    Tip: Be careful not to drop the plug into the drain pan.
  3. Inspect the Drain Plug and Washer
    Check the drain plug for any metal shavings, which can indicate engine wear. Replace the washer/gasket if it looks damaged or crushed.
  4. Refit the Drain Plug
    Once the old oil has stopped draining, wipe the area clean with a rag, then reinstall the drain plug by hand. Torque to the manufacturer's spec using a torque wrench (consult your owner's manual or service guide for specifications) .
  5. Add New Oil
    Locate the oil fill cap (usually on the right side of the engine). Remove it and, using a clean funnel, pour in the new oil. For the 2000 Yamaha RT100, carefully check the oil level using the owner's manual instruction–never exceed the recommended level .
  6. Replace the Fill Cap
    Once the proper amount of oil is added, replace the fill cap securely.
  7. Start and Check for Leaks
    Start the engine and let it run for a minute or two. Check around the drain plug and oil fill cap for any signs of leaks. Shut the bike off and let it sit for a minute, then check the oil level again, topping up if necessary.

Model-Specific Call-Outs for the 2000 Yamaha RT100

  • This model uses a 2-stroke oil system–refer to the “Autolube” section in your manual for additional procedures, adjustments, and recommended oil types .
  • The RT100 is not fitted with a traditional spin-on oil filter. Routine oil changes keep contaminants out of the clutch and bottom end.
  • Make sure to check the oil level window or dipstick after filling, as overfilling can cause performance issues or excessive smoke .
  • Always use the oil grade recommended by Yamaha or a high-quality synthetic two-stroke oil for best performance and longevity .
  • If you notice milky or discolored oil during draining, check for water contamination (possible oil seal issue) and address immediately .

Maintenance Tips and Troubleshooting

  • Perform your oil changes at the intervals recommended in your owner's manual, or more often if riding in harsh conditions .
  • Properly dispose of used oil and rags in accordance with local regulations.
  • Having a service manual on hand, such as those available for the RT100 (1990–2000), provides valuable maintenance diagrams and specifications .
  • Check other fluid and lubrication points during your oil change for overall bike health (chain, cables, etc.) .

Conclusion

Changing the oil on your 2000 Yamaha RT100 is a straightforward process that can be accomplished in less than an hour with the right tools. Stick to recommended oil types and amounts and check for leaks and abnormalities every time you change the oil. For any additional help, consult your RT100 owner's or service manual, also available in print or PDF from reputable sources . Regular maintenance protects your investment and keeps you on the trails longer.

For all your genuine parts, oil, and dirt bike maintenance needs, trust MotoSport.com—your destination for everything powersports.

Related Shopping Categories

Shop Motor Oil for a 2000 Yamaha RT100 Dirt Bike.

Shop Oil Filters for a 2000 Yamaha RT100 Dirt Bike.

Shop Oil Drain Pans for a 2000 Yamaha RT100 Dirt Bike.

Shop Tools for a 2000 Yamaha RT100 Dirt Bike.

Shop Oil Fillers and Drain Plugs for a 2000 Yamaha RT100 Dirt Bike.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.