How to Change the Coolant in a 2025 Beta 350 RR X-PRO
Shop parts for a 2025 Beta 350 RR X-PRO Dirt Bike.
The 2025 Beta 350 RR X-PRO is engineered for serious trail performance, featuring a coolant recovery tank to handle the most demanding off-road conditions and a redesigned frame with improved ergonomics and durability. Regular coolant changes ensure the advanced cooling system keeps your engine running efficiently, even during long, technical rides.–2–3–5
What Makes the 2025 Beta 350 RR X-PRO Unique?
- Coolant Overflow Reservoir: The X-PRO's system helps prevent coolant loss from overheating, which greatly reduces the risk of engine damage on tough rides.–2–3–5
- All-New Frame & Plastics: The 2025 model features an updated chassis and plastics package, boosting performance, handling, and serviceability.–3–5
- Lower Seat Height: The 20mm lower seat height helps with bike control during maintenance as well as on the trail.–5
Before You Start
- Work when the engine is completely cool.
- Have a container to collect old coolant.
- The bike will need genuine coolant specified by Beta (consult your owner's manual for exact type and capacity).
- Check gaskets, hoses, and the overflow tank for wear or damage before reassembly.–2–5
Tools & Supplies
- Allen wrenches and sockets (refer to the owner's manual for exact sizes).
- Funnel and a measuring cup.
- Fresh, manufacturer-recommended coolant.
- Clean rags for spills and cleanup.
Step-by-Step Guide: Changing Coolant on the 2025 Beta 350 RR X-PRO
-
Remove the Skid Plate (if equipped):
Detach the skid plate for easier access to the drain bolt and water pump cover. -
Access the Radiator Cap:
Remove the side panel or shroud as needed. The radiator cap will likely be beneath the right or left panel just above the engine. -
Drain the Old Coolant:
Position your drain pan under the water pump.
Remove the radiator cap to release pressure.
Use the correct wrench to remove the coolant drain bolt, found on the lower part of the water pump casing. -
Empty the Recovery Tank:
If the overflow reservoir has old coolant, disconnect the hose at the tank and carefully drain it as well.–2–3 -
Flush (Optional):
For best results, flush the system with distilled water and repeat the drain process until the water runs clear. -
Reinstall and Secure:
Replace the drain bolt with its washer, torquing to specification from the service manual.
Ensure hoses and clamps are secure, with no cracks or tears. -
Fill with Fresh Coolant:
Using a funnel, pour new coolant into the radiator until full.
Fill the overflow tank to the indicated "Full" level. -
Bleed Air:
Tip the bike from side to side and gently squeeze the radiator hoses to work out any trapped bubbles.
Reinstall radiator cap. -
Warm Up and Top Off:
Start the engine and let it idle with the radiator cap back on to fully circulate the coolant.
After a few minutes, shut down and let cool.
Recheck and top off both the radiator and overflow tank if levels have dropped. -
Reassemble Panels & Skid Plate:
Double-check for leaks and proper fit of all components.
Key Tips Specific to the Beta 350 RR X-PRO
- The coolant recovery tank is a specialized component on the X-PRO model. Always ensure the overflow tank lines and connections are secure after a coolant change.–2–3–5
- The new chassis and bodywork design may affect access points slightly compared to previous Beta models—be patient when removing panels.
- Always use specified coolant to protect advanced engine materials and seals unique to the X-PRO.
Staying on top of regular coolant changes is especially important for the high-performance 2025 Beta 350 RR X-PRO, ensuring reliable power delivery and preventing overheating during demanding trail rides.
Related Shopping Categories
Shop Radiators for a 2025 Beta 350 RR X-PRO Dirt Bike.
Shop Coolant for a 2025 Beta 350 RR X-PRO Dirt Bike.
Shop Temperature Sensors for a 2025 Beta 350 RR X-PRO Dirt Bike.
Shop Tools for a 2025 Beta 350 RR X-PRO Dirt Bike.
Shop Radiator Hoses for a 2025 Beta 350 RR X-PRO Dirt Bike.
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.