How to Change the Coolant in a 2024 KTM 350XWF: A MotoSport Exclusive Guide
Shop parts for a 2024 KTM 350XWF Dirt Bike.
Changing the coolant in your 2024 KTM 350XWF is essential maintenance for optimal engine performance and longevity. The latest generation KTM 350XWF features a compact, high-output four-stroke engine and an updated cooling system, making correct coolant service vitally important for both racers and serious riders. Follow this proprietary MotoSport guide for a smooth, safe, and effective coolant change:
What You Need
- New coolant (KTM recommends a high-quality ethylene glycol-based coolantcheck your manual for specs)
- Distilled water (for flushing, optional)
- 8 mm socket or wrench
- Catch pan or container
- Funnel
- Gloves and eye protection
- Shop towels or rags
Step-by-Step Instructions
- Preparation
- Allow your KTM 350XWF to cool completely before startingnever remove the radiator cap from a hot engine.
- Stand the bike on a level surface using a stand for stability.
- Clean the area around the radiator cap and water pump to prevent debris from entering the system.
- Remove the Radiator Cap
- Slowly loosen and remove the radiator cap to relieve system pressure.
- Drain the Old Coolant
- Locate the coolant drain bolt on the water pump cover (right side of the engine8 mm bolt).
- Position your catch pan under the drain bolt.
- Remove the drain bolt and allow all coolant to fully drain out.
- Gently rock the bike side-to-side to ensure complete drainage from both radiators.
- Flush the System (Optional but recommended for best longevity)
- Reinstall the drain bolt (temporarily, finger tight).
- Fill the radiator with distilled water.
- Reinstall the cap and run the engine for 2-3 minutes (do not let it overheat).
- Shut off the bike, remove the radiator cap, and drain out the distilled water.
- Repeat as needed until the water runs clear.
- Refit the Drain Bolt
- Replace and torque the water pump drain bolt securely. Inspect the sealing washer for damage–replace if needed.
- Refill the Radiator with New Coolant
- Slowly pour new coolant into the radiator using a funnel until just below the filler neck.
- On the KTM 350XWF, bleeding air is crucial: Locate the cylinder head bleed screw (small bolt at the top of the head or as referenced in your service manual).
- Open the bleed screw slightly until coolant flows without air bubbles, then tighten securely.
- Top off the radiator if the level has dropped after bleeding.
- Check for Leaks & Final Steps
- Wipe away spills and inspect all connections.
- With the radiator cap off, briefly start the bikelook for any air bubbles or abnormal coolant movement (do not let it overheat).
- Shut off, top up the coolant if necessary, and reinstall the cap.
Pro Tips for the 2024 KTM 350XWF Owner
- Radiator shrouds on the 350XWF are streamlined for off-road accessremoval is not necessary to change the coolant, but be careful not to damage radiator fins while working around them.
- The cooling circuit is designed for aggressive riding, so using **high-performance coolant** and regular service is vital for desert, woods, or enduro riders.
- Monitor for signs of overheating such as frequent radiator fan activation or visible coolant lossthese may indicate leaks or blocked passages.
- Always check coolant level before every ridemodern KTM engines operate at higher temperatures due to increased power output.
With these MotoSport-exclusive tips & step-by-step directions, your 2024 KTM 350XWF will run cooler, more efficiently, and reliably–no matter where you ride.
Related Shopping Categories
Shop Radiators for a 2024 KTM 350XWF Dirt Bike.
Shop Coolant for a 2024 KTM 350XWF Dirt Bike.
Shop Temperature Sensors for a 2024 KTM 350XWF Dirt Bike.
Shop Tools for a 2024 KTM 350XWF Dirt Bike.
Shop Radiator Hoses for a 2024 KTM 350XWF Dirt Bike.
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.