How to Change the Coolant in a 2024 Husqvarna FS 450: MotoSport Exclusive Guide

Shop parts for a 2024 Husqvarna FS 450 Dirt Bike.

Maintaining the cooling system of your 2024 Husqvarna FS 450 is crucial for reliable performance and engine longevity. Periodically flushing and replacing the coolant ensures efficient heat transfer, reduces the risk of overheating, and protects the internal engine components from corrosion and scaling. Use this MotoSport-&exclusive step-by-step guide tailored specifically for your FS 450 to perform a coolant change like a pro.

Tools & Materials Needed

  • Fresh high-performance coolant (e.g., Engine Ice, OEM recommended)
  • Metric socket set (mainly 8mm or 5/16-inch for drain bolt)
  • Rags, funnel, and drain pan
  • Distilled water (for flushing, if desired)
  • Basic hand tools (screwdrivers, pliers)
  • Protective gloves and eyewear

Preparation

  • Ensure your bike is on a level stand and the engine is completely cool before beginning. Never open the radiator cap while hot, as pressurized coolant can cause burns.
  • Remove the seat and plastics as needed for easy access to the radiators and fill cap.

Drain Old Coolant

  • Locate the radiator cap found at the top of the right side radiator. Unscrew the cap to release system pressure.
  • Position a drain pan beneath the water pump area. Find the coolant drain bolt on the lower right side of the engine case. This is typically an 8mm or 5/16-inch bolt.
  • Carefully loosen and remove the drain bolt. Allow the old coolant to fully drain from both radiators and the engine.
  • If flushing, reinstall the drain bolt, pour distilled water into the radiator, and briefly run the engine (30-60 seconds). Let cool and drain again. Repeat until clear water exits. Remove the drain bolt after each run and drain step.

Refill with New Coolant

  • Reinstall and torque the drain bolt to manufacturer spec (do not overtighten–thread pitch is fine, and overtightening can strip the case).
  • Using a funnel, pour the recommended amount of coolant into the radiator's fill opening. Fill slowly to minimize trapped air.
  • Tilt the bike gently side-to-side to help air escape the system. Watch the fill neck and top off as needed.
  • Reinstall the radiator cap securely.

Bleeding Air & Final Steps

  • Start the engine and let it idle for a few minutes, then blip the throttle a few times. Monitor the coolant level at the fill neck and temperature; shut off the engine if it starts to overheat.
  • Allow the engine to cool. Remove the radiator cap and top off if the level has dropped due to expelled air. Repeat cycling and topping off as necessary.
  • Check for leaks around the drain bolt and radiator caps/plugs.

FS 450 Model-Specific Tips & Notes

  • The 2024 Husqvarna FS 450 features lightweight engine architecture and advanced cooling pathways. Always use high-quality coolant designed for magnesium aluminum cases to prevent internal corrosion and ensure efficient cooling performance.
  • The FS 450 engine includes integrated service markers on the engine cases. When reinstalling the drain bolt, align with these service markers for proper maintenance and interval tracking.
  • The design features efficient anti-squat chassis geometry and compact cylinder head. Proper coolant change ensures that both the high-compression setups and thermal management systems function at peak spec for supermoto riding demands.

Maintenance Reminders

  • Change the coolant at least every year, or more often for competition or heavy use.
  • Inspect hoses and radiator fins for wear or buildup during each coolant service.
  • Never mix coolant types; flush thoroughly when switching brands or formulations.

Regular coolant replacement not only protects your FS 450 but ensures you get the best performance and reliability every time you hit the track or street.

Related Shopping Categories

Shop Radiators for a 2024 Husqvarna FS 450 Dirt Bike.

Shop Coolant for a 2024 Husqvarna FS 450 Dirt Bike.

Shop Temperature Sensors for a 2024 Husqvarna FS 450 Dirt Bike.

Shop Tools for a 2024 Husqvarna FS 450 Dirt Bike.

Shop Radiator Hoses for a 2024 Husqvarna FS 450 Dirt Bike.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.