How to Change the Coolant in a 2022 Husqvarna FS 450
Shop parts for a 2022 Husqvarna FS 450 Dirt Bike.
The 2022 Husqvarna FS 450 stands out as a high-performance supermoto, utilizing a powerful 450cc engine derived from the brand’s motocross line. Proper cooling is crucial for this bike’s potent single-cylinder engine. If you want to ensure optimal performance and protect vital engine components, regular coolant replacement is a must. Follow this proprietary MotoSport guide for a safe and effective coolant change on your FS 450:
Preparation
- Allow the bike to cool completely before working to avoid burns from hot coolant.
- Secure the motorcycle upright using a stand.
- Gather the following: new coolant compatible with aluminum motorcycle engines, clean funnel, catch pan or container, appropriate hand tools (including T-handles or sockets), clean rags, safety gloves, and eye protection.
Step-by-Step Coolant Change Procedure
- Remove radiator shrouds or covers as needed for easier access to the radiators and coolant fill area.
- Release system pressure by slowly opening the radiator cap. Open it partially first to release any built-up pressure, then remove completely.
- Locate the coolant drain bolt at the lowest point of the water pump cover–this is typically on the right side of the engine. Position your catch pan underneath.
-
Unscrew the drain bolt and let all coolant drain into your pan. To speed up draining, you can also loosen the bleed screw (if equipped) near the top of the radiator for full system evacuation.
Pro tip: Move the bike gently from side to side to dislodge trapped coolant. Dispose of old coolant properly, as required by your local regulations. - Inspect and clean the drain bolt, then reinstall with the specified torque. Use a new sealing washer if needed to prevent leaks.
-
Fill with fresh coolant through the radiator neck. Pour slowly with a funnel, watching the fill level. The correct level is just above the radiator core fins when the bike is upright.
Avoid overfilling, as this can cause overflow once the engine heats up. - Bleed air from the system by tipping the bike side to side, gently squeezing radiator hoses. If your FS 450 has a designated bleed screw, loosen it slightly to let out trapped air, then tighten it when coolant seeps out.
- Reinstall the radiator cap securely.
-
Start the engine and let it idle for a few minutes. Watch the coolant level–top off if it drops due to trapped air escaping.
Check under the bike for leaks around the drain bolt and radiator hoses. - Reinstall all bodywork and check again after a short ride. Inspect for leaks and confirm coolant is still at the correct level after cooling down.
Special Considerations for Your 2022 Husqvarna FS 450
- Coolant capacity and composition: Use only a high-quality, motorcycle-specific coolant compatible with aluminum components. Avoid automotive coolants that may contain silicates or phosphates harmful to your system.
- Regular maintenance: The high compression and thermal load of the FS 450’s engine make annual coolant changes especially important for maintaining consistent power output and preventing hot spots or detonation.
- Radiator protection: Consider installing radiator guards if you ride on tracks or in environments with debris to reduce the risk of puncture and unplanned coolant loss.
Performing a coolant change on your FS 450 is a straightforward but essential task to support engine longevity, especially given this model’s racing pedigree and demanding use. Stay ahead of maintenance and keep your Husqvarna performing at its best by following this exclusive MotoSport guide.
Related Shopping Categories
Shop Radiators for a 2022 Husqvarna FS 450 Dirt Bike.
Shop Coolant for a 2022 Husqvarna FS 450 Dirt Bike.
Shop Temperature Sensors for a 2022 Husqvarna FS 450 Dirt Bike.
Shop Tools for a 2022 Husqvarna FS 450 Dirt Bike.
Shop Radiator Hoses for a 2022 Husqvarna FS 450 Dirt Bike.
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.