How to Change the Coolant in a 2022 Beta 300 RX: MotoSport Guide

Shop parts for a 2022 Beta 300 RX Dirt Bike.

Keeping the cooling system in peak condition is critical for the Beta 300 RX—one of the most race-focused two-stroke machines on the market. Regularly changing your coolant ensures top engine performance, temperature control, and long-term durability. This step-by-step guide, tailored explicitly for owners of the 2022 Beta 300 RX, walks you through the process and highlights Beta-specific maintenance tips you will not find elsewhere.

What You Need

  • Fresh motorcycle-approved coolant (consult your owner manual for Beta's recommendation)
  • Drain pan
  • Socket or wrench set
  • Clean funnel
  • Protective gloves & eyewear
  • Shop towels

Step 1: Prepare the Bike & Workspace

  • Make sure the bike is parked on a stable, level surface.
  • Allow the engine to cool completely to avoid burns—Beta's cooling system is pressurized and hot coolant can cause injury.
  • Remove the right radiator shroud for easier access to the radiator cap and coolant drain plug.

Step 2: Drain the Old Coolant

  • Remove the radiator cap to relieve any built-up pressure.
  • Locate the coolant drain bolt at the lowest part of the cooling system, typically on the water pump cover.
  • Place your drain pan securely underneath this area.
  • Use the correct socket to slowly remove the drain bolt and let coolant fully evacuate. Carefully rock the bike side to side to help completely drain both radiators.
  • Inspect drained coolant for debris, which may indicate system contamination or corrosion.

Step 3: Inspect System Components

  • While the coolant is out, examine radiator hoses and clamps for signs of wear or cracking. Replace any suspect components as needed.
  • Paste or a small amount of thread sealant on the drain bolt threads is a good idea to prevent future leaks before reinstalling.
  • Tighten the drain bolt to the specification found in your owner's manual.

Step 4: Refill with New Coolant

  • Using a clean funnel, slowly pour new coolant into the radiator neck. On modern Beta bikes (2020 and newer), there are no bleeder screws—just fill up to just above the radiator core fins inside the neck, not entirely to the top.
  • Do not overfill—coolant expands as the engine heats up.
  • Reinstall the radiator cap securely.

Step 5: Bleed Air & Check Level

  • Start the bike and let it idle for about 5–10 minutes, allowing the water pump to circulate coolant. Gently rock the bike to help release trapped air.
  • Shut off the engine and carefully loosen the radiator cap with a rag to check the coolant level again. Top off to maintain the level just above the radiator core if needed.
  • Reinstall the radiator cap and wipe up any spilled coolant.

Step 6: Dispose of Old Coolant Responsibly

  • Never pour used coolant down the drain or onto the ground. Take it to a certified hazardous waste site or recycling center.

Beta 300 RX Owner-Specific Tips

  • This model features forced liquid circulation powered by a robust water pump, making proper coolant levels and system integrity even more critical to avoid overheating during hard MX use.
  • Beta dropped the radiator bleeder screw design on modern 300 RXs, relying instead on careful top-up and burping as described above.
  • Silicone hoses and radiators are durable but should be checked for wear every coolant change, particularly after crash impacts or racing incidents.
  • Use only the coolant types recommended by Beta to avoid internal corrosion and to protect seals and gaskets.

Final Inspections & Ride Preparation

  • Double check for leaks around the drain bolt and hose connections.
  • Reinstall your shroud and clean up any coolant residue.
  • Perform a 5-minute warm-up and another quick coolant level check, as system air bubbles may continue to purge after your first ride.

Related Shopping Categories

Shop Radiators for a 2022 Beta 300 RX Dirt Bike.

Shop Coolant for a 2022 Beta 300 RX Dirt Bike.

Shop Temperature Sensors for a 2022 Beta 300 RX Dirt Bike.

Shop Tools for a 2022 Beta 300 RX Dirt Bike.

Shop Radiator Hoses for a 2022 Beta 300 RX Dirt Bike.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.