How to Change the Coolant in a 2020 Cobra CX50SR

Shop parts for a 2020 Cobra CX50SR Dirt Bike.

Routine coolant replacement is critical for the sustained performance – and protection – of the 2020 Cobra CX50SR. This proprietary guide from MotoSport.com ensures you tackle the task confidently, with steps and tips unique to the CX50SR.

Before You Begin

  • Work with a completely cool engine to avoid burns.
  • Ensure you have premixed motorcycle coolant (never use plain water or tap water for mixing).
  • A drain pan, funnel, rags, and gloves are recommended for cleanliness – consider eye protection.

Step 1: Locate Drain Points

  • Find the coolant drain bolt at the water pump cover's lowest point.
  • Position the drain pan to catch old coolant.

Step 2: Drain Old Coolant

  • Remove the radiator cap to relieve system pressure.
  • Loosen – then remove – the coolant drain bolt; allow all fluid to drain.
  • If your model features a bleed bolt, open it briefly to release trapped air, then close once coolant flows without bubbles.

Step 3: Flush If Needed

  • A flush is recommended if the system's maintenance history is unknown or if coolant appears dirty. Use distilled water (never tap water) for flushing, drain again, and repeat until water runs clear.
  • If you suspect impeller damage due to overheating or debris, a back flush is crucial per Cobra's manual. You must ensure no solid particles remain in the system before refilling.

Step 4: Reinstall Drain Bolt

  • Replace the drain bolt, using a fresh sealing washer if needed for leak prevention.
  • Tighten securely without over-torquing.

Step 5: Add Fresh Coolant

  • Pour new premixed coolant slowly into the radiator filler neck, using a funnel.
  • Pause frequently to let air escape. Squeeze coolant hoses and gently rock the bike to release hidden bubbles.

Step 6: Burp – Remove Air Bubbles

  • Leave the radiator cap off. Start the bike and let it idle for a few minutes, blipping the throttle occasionally to help air escape.
  • Watch for coolant flow. When the level drops, top up to the base of the filler neck as needed.
  • Once air bubbles no longer surface, replace the radiator cap.

Step 7: Fill the Reservoir

  • Fill the coolant reservoir to the upper line. This acts as an expansion tank as coolant heats & cools.

Step 8: Verify – Final Checks

  • Let the bike cool to ambient temperature, then recheck reservoir and radiator levels.
  • Top off if needed. Reinspect after the first short ride to confirm stable fluid levels.
  • Dispose of old coolant responsibly via your local recycling program.

2020 Cobra CX50SR Owner Tips & Model Notes

  • The CX50SR uses a compact, high-revving engine; coolant condition is crucial for engine longevity and performance.
  • Inspect the impeller for damage during coolant service. Any issues require a back flush per Cobra's manual before refilling.
  • Always use manufacturer-recommended coolants for optimal corrosion protection in magnesium or aluminum cases.
  • Record your coolant change date and hours in your maintenance log for warranty & reliability tracking.

How Often to Change?

  • Cobra recommends coolant service at regular intervals – typically every 24 months or 24 hours of operation for racing applications. Check your owner's manual for service specifics for high-premium minibikes like the CX50SR.

Regular coolant changes maintain your 2020 Cobra CX50SR's peak performance and ensure your bike is ready for every ride and race. Rely on MotoSport.com for all replacement parts & service supplies.

Related Shopping Categories

Shop Radiators for a 2020 Cobra CX50SR Dirt Bike.

Shop Coolant for a 2020 Cobra CX50SR Dirt Bike.

Shop Temperature Sensors for a 2020 Cobra CX50SR Dirt Bike.

Shop Tools for a 2020 Cobra CX50SR Dirt Bike.

Shop Radiator Hoses for a 2020 Cobra CX50SR Dirt Bike.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.