How to Change the Coolant in a 2016 Beta 350 RR
Shop parts for a 2016 Beta 350 RR Dirt Bike.
Routine coolant changes are essential to keep your 2016 Beta 350 RR's engine running cool and performing at its best. Performing this maintenance yourself is straightforward and helps prevent overheating, corrosion, and costly repairs.
What Makes the 2016 Beta 350 RR Unique?
The 2016 Beta 350 RR is a high-performance 4-stroke bike with a liquid-cooled engine, known for its solid power delivery and enduro-focused design. The cooling system requires regular monitoring–especially after hard riding–to ensure optimal operation.
Before You Begin: Safety & Preparation
- Always change coolant when the engine is cold to avoid burns.
- Wear appropriate gloves and eye protection.
- Keep coolant away from children and pets.
- Dispose of old coolant responsibly.
Tools & Materials Needed
- Correct replacement coolant (see your owner's manual for Beta's recommendation)
- Basic hand tools (screwdrivers, socket set)
- Drain pan or suitable container
- Torque wrench for reassembly
- Clean rags
Step-by-Step Coolant Change Procedure
- Position the Bike: Ensure the bike is vertical on a stable surface.
- Remove Engine Casing:
- Loosen and remove the screws on the engine casing (refer to owner's manual for exact locations).
- Access Radiator Cap:
- Unscrew the radiator cap carefully. Never open it hot–scalding liquid can escape under pressure.
- Drain Old Coolant:
- Place your drain pan under the engine. Locate and unscrew the main coolant drain bolt (and washer) as specified in the manual.
- Allow all coolant to drain. If equipped, remove the secondary drain screw to completely empty the system.
- Reinstall Drain Bolts:
- Reinstall all drain screws with their washers. Tighten them securely to the specified torque (typically around 10 Nm).
- Refill with New Coolant:
- Use only the coolant specified for your 2016 Beta 350 RR.
- Pour coolant slowly into the radiator neck until it is visible near the bottom of the filler neck.
- If there is a bleed screw, crack it open until only coolant comes out to help remove air pockets, then close tightly.
- Reinstall Radiator Cap:
- Secure the cap once filled. Reinstall the engine casing and torque the screws to specification.
- Check Level & Run the Bike:
- Start the engine and let it run until it reaches normal operating temperature. Shut it off and let it cool.
- Recheck coolant level and add more if needed.
- Inspect for Leaks:
- Carefully inspect around drain plugs, hoses, and the radiator for leaks after running the bike.
Critical Notes for 2016 Beta 350 RR Owners
- Follow Beta's Recommended Coolant: Using the wrong coolant can cause damage–refer to your owner's manual for the exact specification.
- Check Levels Frequently: Off-road riding can accelerate coolant loss, so check the level before and after intense rides.
- Watch for Overheating: The 350 RR's radiator is efficient, but it can be blocked by mud or debris during tough trail rides. Keep it clean to avoid overheating.
- Expansion Tank: This model uses the reservoir as an expansion tank. As you ride, coolant may move between the radiator and reservoir as temperatures fluctuate–monitor both so levels remain steady.
Staying on top of coolant changes protects your engine, maximizes performance, and ensures a cool ride every time.
Related Shopping Categories
Shop Radiators for a 2016 Beta 350 RR Dirt Bike.
Shop Coolant for a 2016 Beta 350 RR Dirt Bike.
Shop Temperature Sensors for a 2016 Beta 350 RR Dirt Bike.
Shop Tools for a 2016 Beta 350 RR Dirt Bike.
Shop Radiator Hoses for a 2016 Beta 350 RR Dirt Bike.
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.
