How to Change the Coolant in a 2014 Husaberg TE300: A MotoSport Guide
Shop parts for a 2014 Husaberg TE300 Dirt Bike.
Keeping your 2014 Husaberg TE300 at peak operating temperature is essential for performance and reliability. Coolant breaks down over time, so regular changes are keyespecially on high-strung two-strokes like the TE300. This proprietary MotoSport guide gives TE300 owners everything they need to know for a flawless coolant service.
What Makes the 2014 Husaberg TE300 Unique?
The 2014 TE300 is legendary for its power delivery, light chassis, and Scandinavian enduro heritage. Like its Austrian cousin, the KTM 300, your Husaberg shares many cooling system components with other bikes from the KTM/Husaberg family, so proven techniques apply. The TE300's robust water pump, dual radiators, and minimalist two-stroke design mean a quick coolant changeif you know the right steps.
Tools and Supplies Needed
- Fresh coolant (engine-appropriate for aluminum radiators—avoid automotive coolant not designed for motorcycles)
- 10 mm socket and ratchet
- Drain pan
- Funnel
- Clean rags
- Protective gloves (recommended)
Step-by-Step Coolant Change Procedure
- Allow the Engine to Cool: Never open the cooling system on a hot engine. Let the bike rest until the radiators are cool to the touch.
- Remove the Radiator Cap: Locate the radiator cap on the right side. Open slowly to relieve any residual pressure. Removing the cap allows air in and ensures the coolant drains completely.
- Locate the Coolant Drain Bolt: On the TE300, the coolant drain bolt is found on the lower section of the water pump cover on the right engine side. Look for a bolt with a copper washerusually a 10 mm head.
- Position Your Drain Pan: Place the pan under the drain bolt area to catch all the old coolant.
- Remove the Drain Bolt: Carefully loosen and remove the bolt. Old coolant will pour out (direct it into your drain pan). Allow several minutes for thorough draining from both radiators.
- Flush the System (Optional): For extra longevity, fill the system with distilled water, reinstall the bolts, run the bike briefly, then repeat the drain process to clear out any old residue.
- Reinstall the Drain Bolt: Inspect the copper washer for wear or damage. Replace if needed for a leak-free seal. Re-tighten to factory specsnug, not overtightened.
- Refill with Fresh Coolant: Using a clean funnel, slowly add new, motorcycle-specific coolant up to the bottom of the filler neck. Fill both sides of the radiators by tilting the bike side to side, allowing air pockets to escape.
- Bleed the System: With the cap off, gently rock the bike to dislodge trapped air bubbles. Some models allow you to slightly loosen a small bleeder screw at the top of the radiators to speed this process.
- Replace the Radiator Cap: Once coolant level stabilizes near the filler neck and you see no large air pockets bubbling out, reinstall the radiator cap firmly.
- Check for Leaks & Final Top-Off: Start the engine and let it idle a few minutes. Shut it off, let the bike cool, then re-check the coolant level and top off if necessary.
2014 TE300 Owner Tips – What to Watch For
- The TE300's aluminum radiators are robust but can be easily damaged by impacts. Inspect for bent fins or leaks during every service.
- Proper coolant level protects the cylinder and head from overheating – crucial for the two-stroke's narrow tolerance engine.
- If you ride aggressively or in slow, technical terrain, consider a higher performance coolant or install a radiator fan for extra protection.
- If the copper drain bolt washer is crushed or corroded, always replace it to prevent slow leaks.
Environmental Reminder
Coolant is toxic to pets and wildlife. Always dispose of old fluid responsibly at an approved recycling center.
Performing your own coolant change on the 2014 Husaberg TE300 is straightforward with the right tools and procedure. With regular maintenance, your machine will stay cool, powerful, and ready for the toughest rides.
Related Shopping Categories
Shop Radiators for a 2014 Husaberg TE300 Dirt Bike.
Shop Coolant for a 2014 Husaberg TE300 Dirt Bike.
Shop Temperature Sensors for a 2014 Husaberg TE300 Dirt Bike.
Shop Tools for a 2014 Husaberg TE300 Dirt Bike.
Shop Radiator Hoses for a 2014 Husaberg TE300 Dirt Bike.
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.