How to Change the Coolant in a 2012 Husaberg TE300
Shop parts for a 2012 Husaberg TE300 Dirt Bike.
Changing the coolant in your 2012 Husaberg TE300 is a straightforward but essential maintenance procedure that protects your two-stroke engine from overheating and internal corrosion, ensuring maximum performance on the track or trail. The TE300, sharing much of its cooling system design with contemporary KTM models, utilizes a dual-radiator setup with a water pump-driven system, making coolant maintenance both easy and crucial for reliability. Follow this guide for a safe, effective coolant replacement unique to your TE300.
What You Will Need
- New, compatible motorcycle coolant (avoid automotive coolant)
- Socket set, including a 10 mm socket
- Shop towels or rags
- Drain pan or container
- Distilled water (optional, for flushing)
- Safety gloves and glasses
Step-By-Step Coolant Change for the 2012 Husaberg TE300
- Ensure the engine is cool before starting to avoid injury from hot coolant or steam.
- Remove the seat and fuel tank for better access to the radiator filler neck and hoses as needed.
- Locate the radiator cap on the right-hand side. Press the release button, turn the cap counterclockwise, and remove it from the filler neck. This relieves internal pressure and allows coolant to drain smoothly.
- Place a drain pan beneath the water pump, located on the right side of the engine.
- Identify and remove the coolant drain bolt. On the TE300, this is the bolt with a copper washer on the water pump cover. Use a 10 mm socket to remove it carefully. Tip the bike gently if needed to direct flow.
- Allow the coolant to drain completely from both radiators. Opening the bleed screws at the top of the radiators can expedite draining in some circumstances, but generally, removing the cap is sufficient.
- Optional: Flush the system by refilling with distilled water. Reinstall the drain bolt, fill with water, briefly idle the engine (do not overheat), then repeat the drain process to remove contaminants. Repeat as needed for a thorough flush.
- Reinstall the drain bolt with its washer and gently torque to spec. Do not overtighten.
- Pour new coolant into the radiator until the level reaches the base of the filler neck. Rock the bike side to side gently to help purge air from the system.
- Start the engine with the radiator cap off; allow it to idle until you see air bubbles escape and the coolant level drop. Top off as necessary, monitoring for overflow.
- Install the radiator cap by pressing down and turning clockwise until the release button locks in place.
- Let the engine heat cycle completely to operating temperature so the thermostat opens and the coolant circulates throughout the system. Turn the bike off and let it cool fully. Recheck both the radiator and overflow reservoir (if equipped), topping off as required.
Model-Specific Tips & Reminders
- Check for leaks at the water pump, radiator hoses, and drain bolt after the first ride.
- Use only compatible motorcycle coolant. The TE300 requires non-silicate, phosphate-free coolant specifically designed for aluminum engines.
- The radiator and cooling system on the TE300 are closely related to KTM two-stroke models, so parts compatibility and techniques may often be shared across these bikes. However, always refer to the TE300 specifications for torque values and fluid capacity.
- The TE300's water pump and cooling passage design mean it is important to fully bleed air after refilling to prevent potential overheating or vapor lock.
- If you notice persistent coolant loss or milky oil, inspect the water pump seal, as these are wear items on the TE300 and will eventually require replacement.
Final Notes
- Dispose of old coolant responsibly, as it is highly toxic to people and animals.
- Always double-check that all fasteners are properly tightened, and keep an eye on cooling system health for every ride.
Maintaining your 2012 Husaberg TE300's cooling system ensures optimal engine performance and longevity, letting you ride harder for longer, wherever the trail may lead.
Related Shopping Categories
Shop Radiators for a 2012 Husaberg TE300 Dirt Bike.
Shop Coolant for a 2012 Husaberg TE300 Dirt Bike.
Shop Temperature Sensors for a 2012 Husaberg TE300 Dirt Bike.
Shop Tools for a 2012 Husaberg TE300 Dirt Bike.
Shop Radiator Hoses for a 2012 Husaberg TE300 Dirt Bike.
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.
