How to Change the Coolant in a 2011 Husqvarna TE449: A Step-by-Step MotoSport Guide

Shop parts for a 2011 Husqvarna TE449 Dirt Bike.

The 2011 Husqvarna TE449 is renowned for its blend of high-performance enduro technology and innovative engineering, making routine maintenance especially critical for top performance. One of the most importantand often overlookedtasks is coolant replacement. A fresh coolant flush ensures efficient engine cooling, prevents overheating, and protects against internal corrosion. Here is a proprietary, step-by-step MotoSport guide tailored for your TE449 to keep your cooling system at peak performance.

Tools – Supplies Needed

  • New coolant recommended for motorcycles
  • Drain pan
  • Rags for cleaning spills
  • 8mm socket or wrench
  • Funnel
  • Gloves & eye protection

Preparation

  • Park the bike on a solid, level surface and ensure the engine is completely cool.
  • Remove the seat and side panels if they restrict radiator cap or drain bolt access.

Draining the Old Coolant

  • Place a drain pan on the right-hand side of the cylinder, directly beneath the coolant drain screw.
  • Using an 8mm wrench or socket, remove the drain screw on the right side of the cylinder first.
  • Slowly open the left-hand radiator cap to allow air inthis accelerates draining.
    Note: Removing the drain screw before the radiator cap reduces sudden coolant outflow and splash hazards.
  • After coolant stops flowing, inspect the used coolant. If contaminated with debris, consider flushing with distilled water before refilling.

Refilling with New Coolant

  • Reinstall the drain screw and tighten firmly, ensuring no cross-threading or overtightening.
  • With a funnel, slowly pour the new coolant into the left radiator.
  • Fill up to the base of the filler neck, do not overfill.

Bleeding Air from the System

  • Start the engine and let it idle with the radiator cap off. Gently rock the bike to help trapped air escape.
  • When the coolant level drops as air escapes, top off as needed, keeping the level near the filler neck.
  • Rev the engine lightly a few times to assist bubble evacuation, but avoid high RPM before full circulation.
  • Once stable, install the radiator cap firmly.
  • Allow the engine to reach normal operating temperature and shut it off. Let the bike cool down completely, then check coolant level in the radiator and the overflow reservoir. Top off if necessary.

Special Notes for the 2011 Husqvarna TE449

  • The TE449's unique coaxial drive system and advanced chassis integration demand strict attention to cooling maintenance; overheating may affect clutch operation and long-term reliability.
  • Check for leaks around the water pump and hoses after every coolant change.
  • Coolant expansion and contraction may alter reservoir levels during the first few heat cycles; minor adjustments after the initial change are normal and should be monitored.
  • Always use motorcycle-specific coolant to prevent damagenever use plain water or automotive-only coolants.
  • Inspect the radiator cap and hoses for cracks or wear. Replace any suspect components to prevent system failures.

Finishing Up

  • Dispose of old coolant properly at a recycling centernever pour down the drain.
  • Reinstall bodywork and seat.
  • Record the coolant change in your maintenance log for future reference.

Routine coolant changes are essential for your TE449's consistent, rugged performance – follow this MotoSport guide to tackle the job confidently, knowing you are protecting your investment and ready for every ride.

Related Shopping Categories

Shop Radiators for a 2011 Husqvarna TE449 Dirt Bike.

Shop Coolant for a 2011 Husqvarna TE449 Dirt Bike.

Shop Temperature Sensors for a 2011 Husqvarna TE449 Dirt Bike.

Shop Tools for a 2011 Husqvarna TE449 Dirt Bike.

Shop Radiator Hoses for a 2011 Husqvarna TE449 Dirt Bike.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.