How to Change a Spark Plug in a 2010 Can-Am DS90

Maintaining your 2010 Can-Am DS90 is crucial for optimal performance, and changing the spark plug is a key part of that maintenance. Whether you're a seasoned rider or new to ATV maintenance, this guide will walk you through the process of changing the spark plug in your DS90.

Shop parts for a 2010 Can-Am DS90 ATV.

Tools and Materials Needed

  • Spark plug socket wrench
  • New spark plug (compatible with 2010 Can-Am DS90)
  • Torque wrench
  • Dielectric grease

Step-by-Step Guide

Step 1: Prepare Your ATV

Ensure your ATV is on a flat surface and the engine is cool to prevent burns. Disconnect the battery to avoid any electrical issues while working.

Step 2: Locate the Spark Plug

The spark plug on the 2010 Can-Am DS90 is located on the engine's top side. You may need to remove some panels or covers to access it, depending on your model's configuration.

Step 3: Remove the Old Spark Plug

Use the spark plug socket wrench to carefully unscrew the old spark plug. Turn counterclockwise until it is loose enough to remove by hand. Inspect the old plug for any signs of wear or damage, which can indicate engine issues.

Step 4: Install the New Spark Plug

Before installing the new spark plug, apply a small amount of dielectric grease to the plug's threads. This helps prevent corrosion and ensures a good connection. Carefully screw the new spark plug into the engine by hand to avoid cross-threading, then tighten it with the torque wrench to the manufacturer's specified torque setting.

Step 5: Reassemble and Test

Reattach any panels or covers you removed earlier. Reconnect the battery and start the engine to ensure the new spark plug is functioning correctly. Listen for any unusual sounds or misfires, which could indicate improper installation.

Important Notes for 2010 Can-Am DS90 Owners

The 2010 Can-Am DS90 is known for its reliability and ease of maintenance. However, regular checks and timely replacements of parts like the spark plug are essential to keep it running smoothly. Always use parts that are compatible with your specific model to avoid performance issues.

By following these steps, you can ensure your 2010 Can-Am DS90 remains in top condition, providing you with a reliable and enjoyable riding experience. Remember, regular maintenance is key to the longevity of your ATV.

Related Shopping Categories

Shop Spark Plugs for a 2010 Can-Am DS90 ATV.

Shop Engine Tools for a 2010 Can-Am DS90 ATV.

Shop Feeler Gauges for a 2010 Can-Am DS90 ATV.

Shop Batteries for a 2010 Can-Am DS90 ATV.

Shop Tools for a 2010 Can-Am DS90 ATV.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.