How to Change a Spark Plug in a 2008 Can-Am DS90

Maintaining your 2008 Can-Am DS90 is crucial for optimal performance, and one of the simplest yet most effective maintenance tasks is changing the spark plug. This guide will walk you through the process, ensuring your ATV runs smoothly and efficiently.

Shop parts for a 2008 Can-Am DS90 ATV.

Tools and Materials Needed

  • Spark plug socket
  • Ratchet wrench
  • New spark plug (compatible with 2008 Can-Am DS90)
  • Gap tool
  • Anti-seize compound (optional)

Step-by-Step Guide

Step 1: Locate the Spark Plug

The spark plug on the 2008 Can-Am DS90 is located on the engine's top side. Remove any panels or covers if necessary to access it easily.

Step 2: Remove the Spark Plug Cap

Carefully pull the spark plug cap off the plug. Be gentle to avoid damaging the wire or the cap itself.

Step 3: Remove the Old Spark Plug

Using the spark plug socket and ratchet wrench, turn the spark plug counterclockwise to remove it. Once loose, you can finish unscrewing it by hand.

Step 4: Check the New Spark Plug

Before installing the new spark plug, check the gap using a gap tool. The correct gap for the 2008 Can-Am DS90 should be set according to the manufacturer's specifications. Adjust if necessary.

Step 5: Install the New Spark Plug

Apply a small amount of anti-seize compound to the threads of the new spark plug if desired. Carefully thread the new spark plug into the engine by hand to avoid cross-threading. Once hand-tight, use the spark plug socket and ratchet to snug it up. Do not over-tighten.

Step 6: Reattach the Spark Plug Cap

Firmly press the spark plug cap back onto the new spark plug until it clicks into place.

Additional Tips for 2008 Can-Am DS90 Owners

The 2008 Can-Am DS90 is known for its reliability and ease of maintenance. Regularly check the air filter and oil levels to ensure your ATV continues to perform at its best. Additionally, inspect the tires and brakes periodically for wear and tear.

By following these steps, you can easily change the spark plug on your 2008 Can-Am DS90, ensuring a smooth and efficient ride. Regular maintenance not only extends the life of your ATV but also enhances your riding experience.

Related Shopping Categories

Shop Spark Plugs for a 2008 Can-Am DS90 ATV.

Shop Engine Tools for a 2008 Can-Am DS90 ATV.

Shop Feeler Gauges for a 2008 Can-Am DS90 ATV.

Shop Batteries for a 2008 Can-Am DS90 ATV.

Shop Tools for a 2008 Can-Am DS90 ATV.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.