How to Bleed the Brakes on a 2024 Honda Africa Twin 1100 Adventure Sports ES DCT

Shop parts for a 2024 Honda Africa Twin 1100 Adventure Sports ES DCT Motorcycle.

Why and When This Africa Twin Needs a Brake Bleed

The 2024 Honda Africa Twin 1100 Adventure Sports ES DCT uses hydraulic disc brakes at both ends and is ABS-equipped. The DCT gearbox does not change the brake bleeding procedure; the job is still about moving fresh fluid through the front and rear hydraulic circuits and purging air. A routine bleed is also a fluid refresh, so it is worth doing even when the brakes feel normal if the fluid has been in service for a long time.

Bleed the brakes when the front lever or rear pedal feels spongy or soft, when the lever pulls closer to the grip than it used to, when the reservoir fluid looks dark or cloudy, or after any work that opened the hydraulic system, such as new lines, caliper service, or master cylinder work. Brake fluid absorbs moisture over time, which lowers its boiling point and can lead to brake fade under hard use. That is why many riders refresh the fluid on a regular schedule rather than waiting for a symptom.

Tools and Supplies to Have Ready

  • Fresh brake fluid of the type marked on the master cylinder reservoir cap, from a sealed container
  • A box-end wrench that fits the bleeder valve
  • A length of clear tubing that fits snugly over the bleeder
  • A catch bottle for old fluid
  • Rags or shop towels
  • A syringe or turkey baster for removing old fluid from the reservoir
  • A screwdriver or driver for the reservoir cap screws

A one-way check-valve bleeder or a vacuum bleeder can make the job easier for one person, but the basic lever-and-bleeder method works fine with a helper. Keep the fluid container capped when not pouring, and do not reuse fluid that has been sitting open.

Set Up the Bike and Protect Sensitive Surfaces

Support the Africa Twin securely upright on a stand so it cannot tip while you are working the lever or pedal. Turn the handlebars so the front reservoir sits level before you open it. Cover painted surfaces, plastics, and the instrument area with rags, because most brake fluids damage paint and plastic on contact. If fluid spills, wipe it up immediately and rinse the area with water.

Keep the reservoir cap and diaphragm clean and set them on a clean towel. Have the catch bottle positioned so the clear tube runs downhill and cannot be kicked over. Work one hydraulic circuit at a time, and keep the reservoir topped off throughout the job so it never draws air into the system.

Bleeding the Front and Rear Hydraulic Systems

This bike has hydraulic brakes front and rear, so both circuits need attention. If your bike has two front calipers, bleed each one in turn. As a general practice, start with the caliper farthest from the master cylinder, then move to the closer one. The following sequence applies to each caliper or bleeder you service.

  1. Remove the reservoir cap and diaphragm. Use a syringe or turkey baster to remove most of the old fluid from the reservoir without letting it run dry.
  2. Refill the reservoir with fresh fluid of the type marked on the cap. Leave enough room to reinstall the diaphragm later, but do not let the level fall low during the bleed.
  3. Fit the clear tubing snugly over the bleeder valve and route the other end into the catch bottle. Keep the tube end submerged in old fluid in the bottle if possible.
  4. For the front brake, squeeze the lever and hold it. For the rear brake, press the pedal and hold it. Do not pump repeatedly while the bleeder is open.
  5. Open the bleeder about a quarter turn with the box-end wrench. Fluid and air will move out through the tube. Watch the tube for bubbles and color change.
  6. Close the bleeder before releasing the lever or pedal. This prevents air from being drawn back into the caliper.
  7. Release the lever or pedal, check the reservoir level, and top it off. Repeat the squeeze-hold-open-close-release sequence until fresh, clean, bubble-free fluid comes through the tube.
  8. If there are two front calipers, repeat the process on the other caliper. Then service the rear circuit the same way if it is hydraulic. Keep the reservoir from running low at every stage.

Finishing the Job Correctly

When clean fluid is flowing and no bubbles remain, tighten the bleeder snugly without overtightening. Fill the reservoir to the correct level marking, reinstall the diaphragm and cap, and clean any spilled fluid from the reservoir, caliper, and surrounding surfaces. Check for leaks at the bleeder and at the banjo fittings before you put the bike away.

Look over the clear tube and catch bottle one last time. If the fluid you pulled through is still dark or contains debris, consider another pass with fresh fluid. Do not leave the reservoir cap loose or the diaphragm pinched.

Test Before You Ride

The front lever and rear pedal should feel firm and consistent, not spongy, and they should not slowly sink under steady pressure. Spin each wheel to confirm the brakes are not dragging. Test the brakes at low speed in a safe area before riding normally. If the lever or pedal does not feel right, do not ride the bike until the problem is resolved.

When to Stop and Take It to a Shop

A lever that will not firm up after several bleeding attempts, a lever that firms up only after pumping, persistent air bubbles, or fluid leaking from the master cylinder or caliper are signs to stop and have the system inspected. If the reservoir ran dry, or if the ABS unit or its lines were disconnected, air may have entered the ABS unit itself. That may require a dealer-level procedure or diagnostic tool, so the bike should go to a shop rather than being bled further at home.

Related Shopping Categories

Shop Brake Fluid for a 2024 Honda Africa Twin 1100 Adventure Sports ES DCT Motorcycle.

Shop Brake Lines for a 2024 Honda Africa Twin 1100 Adventure Sports ES DCT Motorcycle.

Shop Brake Pads for a 2024 Honda Africa Twin 1100 Adventure Sports ES DCT Motorcycle.

Shop Stands for a 2024 Honda Africa Twin 1100 Adventure Sports ES DCT Motorcycle.

Shop Brake Tools for a 2024 Honda Africa Twin 1100 Adventure Sports ES DCT Motorcycle.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.