How to Bleed the Brakes on a 2015 Kawasaki Concours 14 ABS
Shop parts for a 2015 Kawasaki ZG1400 - Concours ABS Motorcycle.Why the Concours 14 ABS Needs a Proper Brake Bleed
The 2015 Kawasaki ZG1400 Concours ABS uses hydraulic disc brakes at both ends, and it is equipped with ABS and a linked braking system. That combination makes it a capable sport-touring motorcycle, but it also means the brake hydraulics deserve more respect than a simple single-caliper setup. A standard caliper-level bleed can refresh fluid and remove air from the lines and calipers, but the ABS unit and linked system add complexity. If air has entered the ABS unit itself, or if the system has been opened at the ABS unit or its lines, the bike may need a dealer-level procedure or diagnostic tool.
Riders usually bleed the brakes when the lever or pedal feels spongy, when the lever pulls closer to the grip than it used to, when the fluid in the reservoir looks dark or cloudy, or after any work that opened the hydraulic system. Replacing lines, servicing a caliper, or working on the master cylinder all create opportunities for air to enter. Even without symptoms, brake fluid absorbs moisture over time. Moisture lowers the fluid’s boiling point, which can lead to brake fade under hard use, so many riders refresh the fluid on a regular schedule as preventive maintenance.
Tools and Supplies to Have Ready
- Fresh brake fluid of the type marked on the master cylinder reservoir cap, from a sealed container
- A box-end wrench that fits the bleeder valve
- Clear tubing that fits snugly over the bleeder valve
- A catch bottle for old fluid
- Rags or shop towels, plus a syringe or turkey baster for removing old fluid from the reservoir
- A screwdriver or driver that fits the reservoir cap screws
- Optional: a one-way check-valve bleeder or vacuum bleeder to make one-person bleeding easier
Brake fluid damages paint and many plastics on contact, so keep rags close and plan to wipe up any spill immediately. A clear tube is worth the small expense because it lets you watch the fluid for bubbles and color change as you work.
Preparation Before Opening the Hydraulic System
Support the 2015 Concours 14 securely upright on a stand. Turn the handlebars so the front master cylinder reservoir sits level before you open it. Cover the painted bodywork, the plastic panels, and the instrument area with rags, because a drip from the reservoir or a bleeder can damage surfaces quickly. If fluid does contact paint or plastic, wipe it up immediately and rinse the area with water.
Remove the reservoir cap and diaphragm, then use the syringe or turkey baster to remove most of the old fluid from the reservoir. Do not let the reservoir run dry while you are working. Once air is pulled into the master cylinder, you create more work for yourself and may need to bleed the system more thoroughly. Refill with fresh fluid from the sealed container before you begin bleeding at the caliper.
Step-by-Step Bleeding Procedure
Because this motorcycle has a linked, ABS-equipped system, there are additional bleed points and a required sequence beyond a simple front-only bleed. The steps below describe the basic caliper-level fluid refresh, but if you are not confident about the correct sequence for the linked system, have a shop perform the bleed. Do not guess at the order or jump randomly between bleed points.
- With the reservoir topped off, attach the clear tubing to the bleeder valve and route the other end into the catch bottle.
- On a simple non-linked system, start with the caliper farthest from the master cylinder. On this linked Concours ABS, confirm the correct order before you begin rather than assuming.
- Squeeze and hold the front lever, or press and hold the rear pedal, depending on which circuit you are bleeding.
- Open the bleeder about a quarter turn and let fluid and air escape through the tube.
- Close the bleeder before you release the lever or pedal. Releasing first can draw air back into the system.
- Repeat the squeeze, hold, open, close, and release sequence until fresh, clean, bubble-free fluid comes through the tube.
- Keep topping off the reservoir throughout the job. It must never run low enough to draw air into the master cylinder.
- If the bike has more than one front caliper, bleed each one in turn rather than rushing through one and ignoring the other.
- Move to the rear caliper and repeat the same tube, bleeder, hold, open, close, and release process with the rear pedal.
- Watch the fluid in the clear tube as you work. Bubbles may appear intermittently at first, but they should stop as clean fluid moves through.
Finishing, Testing, and Troubleshooting
When clean fluid is flowing and no bubbles remain, tighten the bleeder snugly without overtightening it. Fill the reservoir to the correct level marking, reinstall the diaphragm and cap, and clean any spilled fluid from the reservoir, calipers, and surrounding surfaces. Check for leaks at the bleeder valves and at the banjo fittings before you ride.
The lever and pedal should feel firm and consistent, not spongy, and they should not slowly sink under steady pressure. Spin each wheel to confirm the brakes are not dragging. Test the brakes at low speed in a safe area before riding normally.
If the lever will not firm up after several bleeding attempts, if it firms up only after pumping, if bubbles keep appearing, or if fluid leaks from the master cylinder or a caliper, stop and diagnose the problem. Any situation where air may have entered the ABS unit or the linked brake system is a good reason to take the 2015 Concours 14 ABS to a qualified shop. A correct bleed on this motorcycle should leave you with a firm, predictable brake feel and confidence that the hydraulic system is ready for the road.
Related Shopping Categories
Shop Brake Fluid for a 2015 Kawasaki ZG1400 - Concours ABS Motorcycle.
Shop Brake Lines for a 2015 Kawasaki ZG1400 - Concours ABS Motorcycle.
Shop Brake Pads for a 2015 Kawasaki ZG1400 - Concours ABS Motorcycle.
Shop Stands for a 2015 Kawasaki ZG1400 - Concours ABS Motorcycle.
Shop Brake Tools for a 2015 Kawasaki ZG1400 - Concours ABS Motorcycle.
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.