Air Filter Cleaning & Replacement Guide for 2024 Kawasaki KLX110
Shop parts for a 2024 Kawasaki KLX110 Dirt Bike.
Keeping your 2024 Kawasaki KLX110 running at peak performance starts with a clean air filter. This simple but vital component protects your engine from dirt, dust & debris—crucial for off-road riding and longevity. Follow this MotoSport-exclusive guide tailored for KLX110 owners.
How Often Should You Clean or Replace?
- Clean every 6 months or every 50 hours of use under typical conditions.
- For dusty or muddy environments, clean after every major ride–if the filter appears dirty, service it sooner.
Tools & Supplies Needed
- 8 mm T-handle or socket wrench
- Phillips screwdriver
- Rag (for intake protection)
- Warm soapy water or biodegradable filter cleaner
- Foam filter oil
- Replacement air filter (if needed)
Step-by-Step Air Filter Removal
- Remove both side panels using the T-handle & screwdriver.
- Lift off the seat by undoing the mounting bolts.
- Unscrew the air filter shroud cover: three screws hold it in place.
- Carefully pull off the airbox cover.
- Stuff a rag into the intake tube to prevent debris from entering.
- Extract the air filter. For the 2024 model, it should pop out smoothly—if the foam crumbles or is excessively dirty, replacement is recommended.
Cleaning Procedure
- Rinse the filter in warm soapy water or spray with filter cleaner. Gently massage to remove dirt.
- Repeat rinsing until water runs clear, ensuring both sides of the foam are clean.
- Allow the filter to air dry completely, avoiding direct sunlight for extended periods.
Inspection & Re-Oiling
- Inspect the filter for torn foam, brittleness, or excessive wear. Replace if compromised.
- Apply a uniform layer of foam filter oil once dry—do not oversaturate.
Reinstallation
- Clean the inside of the airbox using a rag or parts cleaner. Ensure no residual dirt or oil remains.
- Slide the filter back onto its mounting cage (if equipped) or press into place.
- Replace the cover and side panels, then reseat the seat, aligning the seat notch with the mounting screw.
Model-Specific Tips for the 2024 KLX110
- The airbox is positioned on the left side just beneath the panels—all fasteners for removal are 8 mm bolts or Phillips screws.
- Filter design is classic foam—easy to remove and service compared to larger bikes that use internal filter cages.
- Owners have noted occasional seat mounting alignment issues—ensure seat notch is seated around the rear frame screw to avoid vibration-related loosening.
Why Maintain Your Filter?
- A clean filter ensures proper airflow, optimal throttle response & protects against premature engine wear.
- Ignoring filter maintenance can lead to engine bogging, reduced performance, & costly damage—prevention is always better than repair.
For all your replacement parts & upgrades, MotoSport supports every step of your KLX110 ownership experience. Maintain your air filter for worry-free riding and explore our full catalog today.
Related Shopping Categories
Shop Air Filters for a 2024 Kawasaki KLX110 Dirt Bike.
Shop Air Filter Oil for a 2024 Kawasaki KLX110 Dirt Bike.
Shop Air Box Covers for a 2024 Kawasaki KLX110 Dirt Bike.
Shop Tools for a 2024 Kawasaki KLX110 Dirt Bike.
Shop Intake Parts for a 2024 Kawasaki KLX110 Dirt Bike.
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.
