Air Filter Cleaning & Replacement Guide for 2018 Sherco 300SEFAC

Shop parts for a 2018 Sherco 300SEFAC Dirt Bike.

The 2018 Sherco 300SEFAC is built for demanding off-road environments, and proper air filter care is essential for peak engine performance and durability. This model uses a dual-stage foam air filter, common to Sherco's SEF platform, engineered for maximum dust and dirt protection while preserving strong airflow. Neglecting your air filter allows contaminants into the engine, risking performance loss and costly repairs. Follow this MotoSport guide to keep your Sherco breathing clean, whether you're racing or trail riding.

What Makes the 2018 Sherco 300SEFAC Air Filter Unique?

  • Dual-stage foam: Combines a coarse outer layer for trapping large debris with a finer inner layer that captures smaller particles, maximizing engine protection and airflow. 
  • OEM-fitment: Most aftermarket and OEM filters for the 250, 300, and 450 SEF-R and SE-FAC models across 2014–2018 are interchangeable, including offerings from Twin Air, No Toil, and Uni. Always confirm compatibility with your specific year and model. 
  • Thick sealing ring: Assures dirt can't bypass the filter and get into your intake. 

Recommended Cleaning Schedule

  • Inspect the filter after every ride in dusty conditions. For casual or moderate use, check every second or third ride.
  • Replace the air filter if you notice degraded foam, torn seams, or if cleaning no longer restores pliability.

Air Filter Removal Steps

  1. Remove the seat by releasing the mounted bolts or latches.
  2. Access the airbox. Carefully detach the filter by releasing the fastening clip or plate.
  3. Inspect the air filter and airbox for excessive dirt or damage.

Cleaning & Maintenance Procedure

  1. Lightly tap the dirty filter to remove loose debris—never squeeze aggressively or twist the foam. 
  2. Submerge the filter in a bucket of approved air filter cleaner or a mild solvent. Gently work out remaining dirt by massaging the filter. Repeat until the cleaner runs clear.
  3. Rinse thoroughly with clean water and allow to fully air dry (never use compressed air or direct heat). 
  4. Inspect for damage: Replace the filter if the foam looks thin, torn, or glued seams are failing. 
  5. Once dry, massage high-quality foam filter oil evenly into the filter. Ensure full coverage without oversaturation.
  6. Clean the airbox surface and sealing area to prevent dirt ingress.
  7. Reinstall the air filter, ensuring a snug seal around the airbox flange.
  8. Reattach clips/plates and remount the seat securely.

Replacement Air Filter Options

  • Twin Air: Dual-stage with open-pore foam for superior airflow and dust capture. Designed for Sherco SE-FAC models; ensures tight sealing and longevity.
  • No Toil: Dual-layer, high-flow foam. Flame-laminated for durability and easy to clean. Compatible with the 2018 300SEFAC.
  • Uni Filter: Known for pro-level filtration and easy maintenance, also available for 2018 Sherco four-strokes. 

Owner Notes: 2018 Sherco 300SEFAC Air Filter Tips

  • This model's tight-fitting airbox is designed to resist water and mud ingress, but always confirm the sealing surface is spotless before reinstallation.
  • Carry a pre-oiled spare filter for back-to-back race days or extended trail rides—quick swaps prevent dirt from sitting in the intake tract.
  • Over-oiling restricts airflow; use air filter oil sparingly but adequately. Work the oil in until the filter is evenly colored but not dripping.
  • If water crossing often, consider extra pre-filter skins for rapid mid-ride changes.

With regular cleaning and inspection using these MotoSport best practices, your 2018 Sherco 300SEFAC's engine will stay shielded from contaminants mile after mile. Make fresh filters and cleaning products a staple in your maintenance routine for power and longevity.

Related Shopping Categories

Shop Air Filters for a 2018 Sherco 300SEFAC Dirt Bike.

Shop Air Filter Oil for a 2018 Sherco 300SEFAC Dirt Bike.

Shop Air Box Covers for a 2018 Sherco 300SEFAC Dirt Bike.

Shop Tools for a 2018 Sherco 300SEFAC Dirt Bike.

Shop Intake Parts for a 2018 Sherco 300SEFAC Dirt Bike.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.