Air Filter Cleaning – Replacement Guide for 2017 Husqvarna 701 Supermoto
Shop parts for a 2017 Husqvarna 701 Supermoto Dirt Bike.
The air filter in your 2017 Husqvarna 701 Supermoto is a vital component that ensures your engine receives clean, contaminant-free air for optimal performance. Keeping this filter clean – and replacing it when necessary – helps protect your engine from debris, improves fuel efficiency, and maintains your bike’s renowned responsiveness. This guide will outline the steps for cleaning and replacing your air filter, and highlight specific tips relevant to the 701 Supermoto owner.
Why Regular Air Filter Maintenance Matters
- Performance & Horsepower: A clean air filter improves airflow, boosting horsepower and throttle response. The 701 Supermoto benefits from increased airflow and highly efficient filtration with modern performance replacements.
- Fuel Efficiency: Dirty air filters restrict airflow, decreasing engine efficiency. Maintaining the filter ensures efficient fuel consumption.
- Engine Longevity: Clean air keeps contaminants out, preventing premature engine wear.
Recommended Service Intervals
- Clean the filter every 5,000 kilometers (roughly every 3,100 miles) for regular riding, or sooner in dusty/off-road conditions.
- Replace the air filter every 6,200 miles (approximately 10,000 kilometers), or sooner if excessively dirty or damaged.
Types of Air Filters for the 701 Supermoto
- OEM Paper Filters: Reliable and affordable, but must be replaced – not cleaned.
- Reusable Cotton/Oiled Filters: Designed for multiple cleaning cycles; provide increased airflow (up to ~51% over OEM) and high filtering efficiency (98–99%).
Cleaning the Air Filter: Step-by-Step
- Remove your seat and access the airbox by loosening the relevant fasteners.
- Gently pull out the air filter, taking care not to drop dirt into the intake.
- If using a reusable filter, tap out loose dust and wash the filter with an appropriate cleaning solution (foam or cotton filters require specific cleaners).
- Rinse gently with clean water and allow to air dry completely.
- Apply air filter oil (for reusable filters) evenly; do not over-oil or leave dry patches.
- Inspect for tears, holes, or deterioration. Replace the filter if damaged.
- Reinstall the filter making sure it is properly seated and the airbox is free of dirt.
- Secure all panels and the seat before riding.
Replacing the Air Filter
- Follow the removal procedure above.
- Fit your new air filter, ensuring the air sealing surface is perfectly clean to prevent leaks.
- Consider upgrading to a high-flow, reusable performance filter for enhanced airflow and protection specific to the 701 Supermoto’s high-displacement engine.
701 Supermoto Specific Notes
- The 2017 701 Supermoto utilizes a compact airbox under the seat, making access straightforward but requiring care to avoid introducing dirt during maintenance.
- Performance filters have been shown to significantly increase airflow over stock, which maximizes the 701 Supermoto’s responsive engine design.
- Riding off-road or in dusty environments common among supermoto riders necessitates more frequent checks and cleaning cycles.
Pro Tips for Maximum Performance
- Write down the date & mileage after each filter cleaning or replacement for easy tracking.
- Always inspect for a proper seal – a leaking air filter is far worse than a partially clogged one.
- If you notice any loss in power, reduced throttle response, or increased fuel consumption, inspect the air filter immediately.
Related Shopping Categories
Shop Air Filters for a 2017 Husqvarna 701 Supermoto Dirt Bike.
Shop Air Filter Oil for a 2017 Husqvarna 701 Supermoto Dirt Bike.
Shop Air Box Covers for a 2017 Husqvarna 701 Supermoto Dirt Bike.
Shop Tools for a 2017 Husqvarna 701 Supermoto Dirt Bike.
Shop Intake Parts for a 2017 Husqvarna 701 Supermoto Dirt Bike.
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.
