Air Filter Cleaning – Replacement Guide for 2016 Kawasaki KLX110L
Shop parts for a 2016 Kawasaki KLX110L Dirt Bike.
A clean air filter is the first – and most critical – line of defense against dirt and debris that can damage the engine of your 2016 Kawasaki KLX110L. Routine filter maintenance optimizes airflow, protects engine internals, and keeps your dirt bike running strong whether you ride in dusty conditions or just put in regular trail time.
KLX110L Air Filter Design – What Owners Should Know
The 2016 KLX110L features a dual-stage foam air filter, designed to offer maximum filtration while maintaining superior airflow. The outer layer traps larger dirt particles, grime & sand, while the inner stage catches finer dust, ensuring engine protection. Both layers are flame-laminated together for durability and reduce the filter's tendency to clog and restrict performance– regular cleaning is especially vital for bikes used in harsh conditions.
Recommended Cleaning Interval
- Clean the filter every 6 months or every 50 hours of ride time at a minimum.
- For dusty or sandy conditions, clean much more frequently–even after every ride is smart.
Tools & Supplies Needed
- Eight millimeter T-handle or socket
- Philips screwdriver
- Filter cleaning solvent or mild dish soap
- Rag
- Foam filter oil
Step-by-Step Cleaning Instructions
- Remove seat and plastics: Take off both side panels, the seat, and shroud assembly for easy access to the airbox.
- Take off air filter cover: Unscrew the three filter cover screws using your screwdriver.
- Remove the filter: With the cover off, carefully pull out the foam air filter.
- Block intake: Place a rag in the intake tube so dirt does not fall into the carburetor or engine as you work.
- Clean: Wash the foam filter in a gentle solvent or warm soapy water, squeeze (do not wring) the foam, and repeat until clean. Rinse thoroughly, ensuring all soap/oil residues are gone.
- Dry completely: Allow the filter to air dry so no moisture enters the engine.
- Oil: Once dry, apply foam filter oil. Massage evenly to achieve light, uniform coverage–never leave dry spots.
- Reinstall: Remove the rag, refit the filter carefully, and replace the cover, seat, and plastics.
Replacement Tips – When To Change the Air Filter
- If the foam tears, shrinks, or fails to return to its shape after cleaning, replace immediately.
- Maximum engine protection – always use a quality, model-specific dual-stage foam filter.
- Original KLX110L filters are easy to find at MotoSport or can be upgraded for severe riding conditions.
Unique KLX110L Owner Notes
- The KLX110L's elevated suspension compared to KLX110 means it's often ridden harder and in rougher terrain–check filters even more often.
- Never ride with a dry or un-oiled foam filter–motor damage can occur fast.
- Inspect air box seals when cleaning for cracks and replace as needed for best dust protection.
Proper air filter care prevents expensive engine repairs and increases the longevity of your 2016 Kawasaki KLX110L. Stick to these MotoSport.com proprietary steps for easy, worry-free maintenance
Related Shopping Categories
Shop Air Filters for a 2016 Kawasaki KLX110L Dirt Bike.
Shop Air Filter Oil for a 2016 Kawasaki KLX110L Dirt Bike.
Shop Air Box Covers for a 2016 Kawasaki KLX110L Dirt Bike.
Shop Tools for a 2016 Kawasaki KLX110L Dirt Bike.
Shop Intake Parts for a 2016 Kawasaki KLX110L Dirt Bike.
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.
