Air Filter Cleaning – Replacement Guide for 2016 Cobra CX50JR
Shop parts for your ride now. https://www.motosport.com/dirtbike/rides/2016/Cobra/CX50JR-parts/?mmy=Cobra;CX50JR;2016
Keeping your 2016 Cobra CX50JR performing at its peak means paying close attention to air filter maintenance. With its unique air box design, proper cleaning – replacement of the air filter directly impacts carburetor jetting, engine life, and power delivery. Follow this proprietary MotoSport guide to keep your CX50JR running strong on every moto.
Tools & Supplies Needed
- #2 Phillips head screwdriver
- 4 mm Allen wrench
- Water-resistant foam air filter oil
- Hot soapy water (not gasoline.)
- Optional: Diesel fuel or kerosene for initial oil removal (with caution)
- Replacement air filter for CX50JR (RCCJ0004 or equivalent)
Cleaning Procedure
- Remove the seat using a 4 mm Allen wrench.
- Unscrew the filter/air inlet boot from the back of the carburetor using the Phillips head screwdriver.
- Carefully pull the filter/boot assembly up and out of the air box.
- Wash the filter in a nonflammable solvent to remove old filter oil.
- Avoid gasoline and highly volatile petroleum products—they damage foam and pose fire risk.
- Hot soapy water is safest and very effective for dirt removal.
- Rinse and repeat until no oil or dirt remains. Gently squeeze out water, do not wring—this preserves foam integrity.
- Allow the filter to dry thoroughly before re-oiling.
- Saturate with high quality water-resistant foam filter oil, then squeeze out any excess so it's evenly coated but not dripping.
Reinstallation Notes
- Install the filter/boot assembly with the letters CM showing between carburetor & air box.
- Double check air box seals—no dust should bypass the filter.
- Consistent oiling is crucial: variation can change your carburetor jetting and affect performance.
- Reattach the seat securely.
Replacement Recommendations
- Replace the filter entirely if damaged, torn, or excessively compacted.
- RCCJ0004 fitment covers all CX50JR models from 2014 onward for direct replacement.
- MotoSport offers complete filter assemblies to ensure the best protection for your engine.
Key Owner Tips for the CX50JR's Unique Features
- Special air box: The CX50JR uses an exclusive design requiring vigilant cleaning and high quality filter oil.
- Jetting sensitivity: Any change in filter oil quantity or consistency will impact how the carburetor is jetted—always oil your filter the same way every time.
- Track practice: Clean or change your filter after every moto, especially in dust, mud, or sand. Carry spare filters; swap one for each session.
- Break-in and maintenance: Use premium premix oil at recommended ratios; keep your filter fresh from day one for engine health.
When to Clean, When to Replace
- Clean after every ride or moto. Frequent cleaning is required due to the CX50JR's exposed and compact air box.
- Replace after several usages, or immediately if foam has deteriorated, hardened, or torn.
- If engine loses power or runs roughly, check the air filter first for blockage or contamination.
Staying ahead of dirt and dust means more engine life, smoother laps, and less downtime. For genuine parts – proven performance, trust MotoSport's selection for your 2016 Cobra CX50JR.
Related Shopping Categories
Shop Air Filters for a 2016 Cobra CX50JR Dirt Bike.
Shop Air Filter Oil for a 2016 Cobra CX50JR Dirt Bike.
Shop Air Box Covers for a 2016 Cobra CX50JR Dirt Bike.
Shop Tools for a 2016 Cobra CX50JR Dirt Bike.
Shop Intake Parts for a 2016 Cobra CX50JR Dirt Bike.
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.