Air Filter Cleaning & Replacement Guide for 2013 Husqvarna TE310
Shop parts for a 2013 Husqvarna TE310 Dirt Bike.
Keeping the air filter on your 2013 Husqvarna TE310 clean and properly maintained is essential for high performance, optimal torque – and protection against engine damage. This guide is uniquely developed by MotoSport to help TE310 owners with best-practice maintenance tailored to this specific model.
Why Air Filter Care Matters on the TE310
The TE310 engine is designed for aggressive off-road riding, relying on its high-revving powerplant to perform in dusty, dirty environments. The air filter is your primary defense, capturing debris and preventing engine wear. A clogged or damaged filter restricts air flow, negatively impacting horsepower and risking abrasive particles entering the engine.
Choosing the Right Air Filter
- Direct-fit replacements: The TE310 uses a foam air filter that fits securely in the factory air box. Aftermarket options, such as the Hiflofiltro, match OEM specifications for straightforward installation and effective filtration.
- DNA full contour design: Upgrade options include filters built to improve airflow, torque, and horsepower, featuring precision sealing and superior dust capture.
Air Filter Cleaning – Step-by-Step for TE310
- Remove the seat: Undo the fasteners and carefully lift off the seat to access the air box underneath.
- Remove the air filter: Detach the air filter retaining bracket, then gently pull out the filter to avoid dropping any dirt into the air intake.
- Inspect the filter: Check the foam for tears, hard spots, and excess grime. Replace immediately if there are signs of damage.
- Clean the filter: Rinse the filter in a basin with a purpose-made air filter cleaning fluid or mild dish soap. Squeeze (do not wring) the foam gently to remove contaminants.
- Dry thoroughly: Let the filter air dry fully. Using compressed air could damage the foam structure.
- Oil the filter: Apply high-quality foam air filter oil evenly throughout the surface. Gently squeeze out excess — a properly oiled filter should be sticky, but not dripping.
- Reinstall the filter: Ensure the sealing surface is clean. Place the filter back into the air box, secure with the bracket, and check that it has a tight fit with no gaps.
- Replace the seat: Fasten securely.
Replacement Guide
- Interval: Replace the air filter every 10-20 hours of use for rigorous conditions or according to your maintenance schedule.
- Direct replacement: Most aftermarket filters for the TE310 (2013) are direct replacements – no modification needed. Check compatibility information for your exact model and size.
Owner Tips for the 2013 TE310
- Seal care: Periodically inspect the air box sealing edge for warping or cracks – this can cause unfiltered air intake, especially after hard drops or crashes.
- Performance upgrades: Filters designed for increased airflow (such as DNA) may improve throttle response and torque, but always ensure proper oiling for adequate dust protection.
- Assembly notes: The TE310's air box is compact; take care when seating the filter to avoid pinching the foam or leaving gaps.
Final Check
After cleaning or replacing your air filter, run your engine briefly and listen for air leaks. Any unusual whistling or intake noise may indicate imperfect sealing – reseat the filter if necessary for maximum engine protection.
Related Shopping Categories
Shop Air Filters for a 2013 Husqvarna TE310 Dirt Bike.
Shop Air Filter Oil for a 2013 Husqvarna TE310 Dirt Bike.
Shop Air Box Covers for a 2013 Husqvarna TE310 Dirt Bike.
Shop Tools for a 2013 Husqvarna TE310 Dirt Bike.
Shop Intake Parts for a 2013 Husqvarna TE310 Dirt Bike.
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.