Air Filter Cleaning – Replacement Guide for 2013 Husaberg TE250

Shop parts for a 2013 Husaberg TE250 Dirt Bike.

The 2013 Husaberg TE250 stands out for its nimble handling, high-revving 2-stroke powerplant, and robust build. To keep your machine running at its peak, maintaining the air filter is essential—especially if you ride in dusty or sandy conditions common for technical enduro riding. The TE250 uses a dual-foam filter system, often with a Twin Air or Hiflo replacement available, which provides excellent particle filtration without restricting airflow.

Unique Considerations for the 2013 Husaberg TE250

  • Direct access: The airbox is designed for tool-less access, streamlining air filter removal and reinstallation for quick routine maintenance between rides.
  • Foam dual-layer filter: The OEM and leading aftermarket options (such as Twin Air) offer a coarse outer layer for trapping larger debris and a fine inner layer for maximum particle retention without restricting airflow.
  • Chassis design: The compact frame leaves the airbox close to the engine, so keeping the filter clean is crucial for consistent performance and longevity.

Cleaning the Air Filter

  1. Remove the seat using the rear latch.
  2. Access and carefully remove the air filter cage from the airbox. Avoid letting loose debris fall into the intake tract.
  3. Pull off the foam filter from the plastic cage.
  4. Pre-clean the filter by gently tapping to remove loose dirt. Rinse with a mild solution of filter-specific cleaner and warm water until all grime and oil are out. Never use harsh chemicals or wring out the foam harshly, as this damages the fibers.
  5. Rinse thoroughly and gently squeeze excess water. Allow to air dry completely away from direct sunlight or heat sources.
  6. Once dry, apply high-quality foam filter oil evenly to both layers. Massage the oil into the foam thoroughly until fully saturated but not dripping.
  7. Inspect the filter and airbox seal. Replace if you notice tears, unrepairable stains, or a deteriorating seal.
  8. Reinstall the cleaned filter onto the cage. Refit the assembly, ensuring a proper air-tight fit to the airbox. Double-check for a full seal–air leaks mean engine wear.

Replacing the Air Filter

  1. Follow removal instructions as above.
  2. Install a new foam filter, compatible with your 2013 TE250. Notable options that ensure top-end protection and airflow are Twin Air and Hiflo foam filters.
  3. Oil the new filter thoroughly with a dedicated foam filter oil before installation. Fit securely on the cage, check for tears in the foam, and ensure full contact with the airbox seal.
  4. Reinstall following the proper sequence, making sure no gaps exist at the mating surfaces.

Maintenance Tips Specific to the TE250

  • Avoid excessive filter oil, which can restrict airflow and cause fouling, especially on two-strokes.
  • Inspect the airbox drain and clean it regularly–the 2013 Husaberg's airbox can accumulate water and mud on tough trails.
  • Carry a spare, pre-oiled filter for quick swaps on extended rides or races.
  • Ensure the filter cage is seated properly on its pegs–improper installation is a common cause of engine dust ingestion on this chassis.

Routine filter maintenance is key to maximizing the legendary performance and durability of your Husaberg TE250. Proper cleaning and installation also prevent premature wear on the piston, cylinder, and crank bearings, preserving your engine’s lively, responsive feel and reliability on any trail.

Related Shopping Categories

Shop Air Filters for a 2013 Husaberg TE250 Dirt Bike.

Shop Air Filter Oil for a 2013 Husaberg TE250 Dirt Bike.

Shop Air Box Covers for a 2013 Husaberg TE250 Dirt Bike.

Shop Tools for a 2013 Husaberg TE250 Dirt Bike.

Shop Intake Parts for a 2013 Husaberg TE250 Dirt Bike.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.