Air Filter Cleaning – Replacement Guide for 2013 GAS GAS EC300F
Shop parts for a 2013 GAS GAS EC300F Dirt Bike.
The 2013 GAS GAS EC300F demands reliable air filtration for both performance and engine longevity. Regular air filter maintenance is crucial, especially for riders tackling harsh, dusty trails. This MotoSport-exclusive guide details precise steps—and critical tips—for cleaning and replacing the air filter in your EC300F, while highlighting unique model considerations.
Model-Specific Notes: 2013 GAS GAS EC300F
- EC300F uses a premium, dual stage bonded foam filter, designed to trap even the smallest dirt particles while ensuring optimal airflow to the engine. Filters with a thick, flat foam sealing ring are preferred for a perfect seat, vital given the EC300F's unique airbox layout.
- Owners note that the 2013 airbox design can be challenging: it features several hard-to-reach corners, making cleaning slightly more involved than many other dirt bikes. There is also a rubber drain hose at the bottom that can easily clog, so additional inspection and cleaning here is recommended.
Tools & Supplies Needed
- Fresh OEM or premium foam air filter (specific for 2013 EC300F)
- Quality air filter oil (do not use motor oil or gasoline)
- Clean, lint-free rags
- Plastic gloves
- Mild, non-flammable cleaner (air filter cleaner or mild dish soap)
- Small flashlight (for airbox inspection)
How To Remove the Air Filter
- Remove the seat to access the airbox. The seat is typically secured by bolts under the rear fender—use a socket wrench to remove them.
- Locate the air filter inside the airbox. Note its orientation for reinstallation—the filter must seal perfectly to prevent unfiltered air entry.
- Carefully unclip or unscrew the filter cage. Avoid dropping dirt or debris into the air intake.
- Pull out the air filter assembly.
Cleaning Your Air Filter
- Remove the filter from its cage. Gently tap off excess dirt (do not bang or twist the filter).
- Place the filter in a bucket with approved cleaner. Gently squeeze the foam—do not wring, as this can tear the foam.
- Rinse thoroughly with lukewarm water. Repeat until the filter is free of dirt and oil. Inspect for damage or tears. If damaged, replace immediately.
- Completely dry the filter in a well-ventilated area, away from direct heat or sunlight.
Oiling & Reinstalling the Air Filter
- Apply air filter oil evenly, working it gently into all foam surfaces. The filter should appear lightly saturated but not dripping.
- Wipe the filter sealing surface to remove excess oil, ensuring a reliable seal in the airbox.
- Reassemble the filter onto the cage, checking for correct positioning.
- Inspect the airbox: use a flashlight to check all recesses and the bottom drain. Clean thoroughly, paying special attention to the often-clogged rubber drain hose.
- Install the filter back into the airbox, ensuring the sealing edge sits squarely and evenly against the airbox frame.
- Secure the filter cage and reinstall the seat.
Replacement Notes
- Replace the air filter if there are any tears, at regular service intervals, or after extremely dirty rides, even if not visibly damaged.
- Regular inspection of the airbox and drain hose prevents water and dirt from bypassing the filter—addressed specifically for the 2013 EC300F.
- Never use gasoline to clean the filter, as this can damage both the filter and pose safety risks.
With the complex airbox design on the 2013 GAS GAS EC300F, meticulous maintenance is required for peace of mind and engine protection. Trust MotoSport for all your OEM and premium air filter needs, and keep your ride performing its best year-round.
Related Shopping Categories
Shop Air Filters for a 2013 GAS GAS EC300F Dirt Bike.
Shop Air Filter Oil for a 2013 GAS GAS EC300F Dirt Bike.
Shop Air Box Covers for a 2013 GAS GAS EC300F Dirt Bike.
Shop Tools for a 2013 GAS GAS EC300F Dirt Bike.
Shop Intake Parts for a 2013 GAS GAS EC300F Dirt Bike.
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.
