Air Filter Cleaning – Replacement Guide for 2006 Husqvarna WR125

Shop parts for a 2006 Husqvarna WR125 Dirt Bike.

Keeping the air filter in your 2006 Husqvarna WR125 clean is essential for performance and engine longevity. Whether you attack sandy tracks or tight woods, a well-maintained air filter protects your engine from dirt, dust, and debris. This guide provides MotoSport.com’s proprietary process for maintaining and replacing the air filter on your two-stroke legend – the WR125.

Why Air Filter Service is Crucial for Your WR125

The 2006 Husqvarna WR125 relies on a foam air filter located behind the left side panel. Because the WR125 is renowned for responsive two-stroke power and efficient intake design, a contaminated filter quickly diminishes throttle response, engine health, and even fuel economy. Riders who push hard off-road or in dusty conditions need to inspect their filter after every ride.

Tools & Supplies Needed

  • Clean workspace
  • Phillips screwdriver or 8mm T-handle (for seat removal)
  • Approved air filter cleaner and oil (foam-specific)
  • Latex or nitrile gloves
  • Bucket or wash tub
  • Shop towels – Clean, dry rags
  • Plastic bag (for oiling filter)
  • Genuine or high-quality replacement filter when necessary

Removing the Air Filter

  • Remove the seat using your screwdriver or T-handle.
  • Gently pull the left side panel free to access the filter cage and filter.
  • Carefully loosen the filter wingnut and withdraw both the filter and cage. Pay attention not to let dirt fall into the intake tract.

Cleaning Your Air Filter

  • Tap the filter gently to remove excess dust and loose debris.
  • Submerge the filter in approved foam filter cleaner or soapy water. Never use gasoline – it can break down the foam structure.
  • Gently squeeze (never wring or twist) the filter to help break up dirt and oil. Repeat soaking and squeezing as needed until clean.
  • Rinse thoroughly with clean water until no residue remains. Air dry completely – do not use compressed air or high heat.

Oiling & Reinstalling the Filter

  • Once dry, saturate the foam filter with high-quality foam filter oil. Place the filter in a plastic bag to ensure even distribution of oil by massaging it throughout.
  • Reinstall the filter onto the cage, ensuring a uniform seal along the mounting surface. Check for tears, cracks, or hardened areas and replace if questionable.
  • Carefully reinstall the filter and cage, making sure the sealing surface is clean. Fasten securely but do not overtighten.
  • Replace the side panel and seat.

When to Replace Your Filter

Inspect for tears, cracks, or hardened foam every cleaning. The 2006 WR125 uses a dual-layer foam filter, such as the Twin Air or HifloFiltro options, specifically designed for the unique airbox and fitment of this model. Replace the filter if it remains dirty after cleaning, if the foam loses elasticity, or after one to two seasons of regular riding.

Insider Tips for 2006 WR125 Owners

  • Always make sure the filter and cage are installed squarely to create a consistent seal – even minor leaks can harm the high-revving 125cc engine.
  • Keep a spare, pre-oiled air filter on hand for rapid swaps between motos or on multi-day rides.
  • Use a bead of approved air filter grease around the sealing flange if riding in extreme dust or sand.

Routine air filter maintenance protects the Husqvarna WR125’s hallmark engine response and power. A couple of minutes after every ride can triple the life of your motor and keep you riding at your peak.

Related Shopping Categories

Shop Air Filters for a 2006 Husqvarna WR125 Dirt Bike.

Shop Air Filter Oil for a 2006 Husqvarna WR125 Dirt Bike.

Shop Air Box Covers for a 2006 Husqvarna WR125 Dirt Bike.

Shop Tools for a 2006 Husqvarna WR125 Dirt Bike.

Shop Intake Parts for a 2006 Husqvarna WR125 Dirt Bike.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.