2022 GAS GAS MC-E5 Torque Specs: Electric Youth MX Fastener Reference
Shop parts for a 2022 GAS GAS MC-E5 Dirt Bike.
The 2022 GAS GAS MC-E5 continues GAS GAS’s electric youth MX program with a refined platform suited to beginner and intermediate young riders. The electric powertrain eliminates two-stroke premix and top-end service requirements while introducing a different maintenance focus: motor mounts, battery hardware, electrical connections, and the chassis components that are shared with combustion youth MX bikes. Keeping the MC-E5 properly maintained ensures the young rider has a reliable, safe machine every session.
This is the torque reference for the 2022 GAS GAS MC-E5.
Electrical System & Motor Mounting
Motor and battery mounting integrity on the 2022 MC-E5 is the primary electrical system maintenance item. Always disconnect the main battery before performing any electrical system service on this youth electric machine.
| Component | Torque Spec |
|---|---|
| Motor mounting bolts | 18–22 Nm (13–16 ft-lb) |
| Battery pack mounting bolts | 10–12 Nm (7–9 ft-lb) |
| Controller housing fasteners | 4–6 Nm (3–4 ft-lb) |
Suspension & Chassis Fasteners
Youth-scale suspension hardware on the 2022 MC-E5 uses smaller fasteners than adult bikes. A low-range torque wrench is required for accurate values at these small torque specifications.
| Fastener | Torque Spec |
|---|---|
| Fork clamp bolts | 8–10 Nm (6–7 ft-lb) |
| Handlebar clamp bolts | 8–10 Nm (6–7 ft-lb) |
| Swingarm pivot bolt | 22–26 Nm (16–19 ft-lb) |
| Rear shock mounting bolts | 18–22 Nm (13–16 ft-lb) |
| Subframe bolts | 8–10 Nm (6–7 ft-lb) |
Drivetrain & Wheels
Electric drivetrain fasteners on the 2022 MC-E5 should be checked before every ride session. Pre-ride axle nut and drive fastener checks are an important part of youth machine preparation, regardless of powertrain type.
| Fastener | Torque Spec |
|---|---|
| Front axle nut | 15–20 Nm (11–15 ft-lb) |
| Rear axle nut | 30–35 Nm (22–26 ft-lb) |
| Drive sprocket/pulley bolts | 10–12 Nm (7–9 ft-lb) |
| Drive adjuster lock nuts | 5–7 Nm (4–5 ft-lb) |
Brakes
Disc brake hardware on the 2022 MC-E5 is scaled for the youth electric machine. Thread locker on disc bolts and pre-ride caliper mount checks are standard maintenance for any youth competition machine.
| Fastener | Torque Spec |
|---|---|
| Front caliper mounting bolts | 10–12 Nm (7–9 ft-lb) |
| Rear caliper mounting bolts | 8–10 Nm (6–7 ft-lb) |
| Brake disc bolts | 5–6 Nm (4–5 ft-lb) |
A low-range beam or digital torque wrench (3–30 Nm) is the correct tool for the 2022 GAS GAS MC-E5. Disconnect the main battery before any electrical system service. Pre-ride fastener and electrical connector checks before every session are the two key habits for keeping this electric youth machine performing safely.
Related Shopping Categories
Shop Torque Wrenches for a 2022 GAS GAS MC-E5 Dirt Bike.
Shop Wrenches and Sockets for a 2022 GAS GAS MC-E5 Dirt Bike.
Shop Thread Locker for a 2022 GAS GAS MC-E5 Dirt Bike.
Shop Additional Tools for a 2022 GAS GAS MC-E5 Dirt Bike.
Shop Penetrating Oil for a 2022 GAS GAS MC-E5 Dirt Bike.
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.
