2019 Honda CRF150R Torque Specs
Shop parts for a 2019 Honda CRF150R Dirt Bike.
The 2019 Honda CRF150R continued to be one of the most capable small-bore motocross race bikes in production, built around a 149cc liquid-cooled DOHC four-stroke, an aluminum twin-spar frame, and fully adjustable race-spec suspension. Accurate torque specs are the foundation of maintenance work on any race bike, and the 2019 CRF150R is no exception.
Swingarm & Linkage Torque
The swingarm pivot and Pro-Link linkage hardware on the 2019 CRF150R handle the full impact loads of motocross landings. Swingarm pivot nut torque must be sufficient to prevent pivot shaft movement without preloading the bearings and creating binding through the suspension stroke.
Complete Torque Specs
| Fastener | Torque (ft-lb) | Torque (Nm) |
|---|---|---|
| Spark plug | 10–13 ft-lb | 14–18 Nm |
| Oil drain bolt | 18–22 ft-lb | 25–30 Nm |
| Cylinder head bolts (8mm) | 18–22 ft-lb | 25–30 Nm |
| Cylinder head bolts (6mm) | 8–11 ft-lb | 11–15 Nm |
| Cam sprocket bolt | 14–17 ft-lb | 19–23 Nm |
| Flywheel nut | 36–43 ft-lb | 49–59 Nm |
| Clutch hub nut | 72–87 ft-lb | 98–118 Nm |
| Clutch spring bolts | 6–8 ft-lb | 8–11 Nm |
| Front axle nut | 36–43 ft-lb | 49–59 Nm |
| Rear axle nut | 47–54 ft-lb | 64–74 Nm |
| Rear sprocket nuts | 22–29 ft-lb | 30–39 Nm |
| Chain adjuster lock nuts | 11–15 ft-lb | 15–20 Nm |
| Fork upper clamp bolts | 14–18 ft-lb | 19–25 Nm |
| Fork lower clamp bolts | 14–18 ft-lb | 19–25 Nm |
| Handlebar clamp bolts | 11–15 ft-lb | 15–20 Nm |
| Swingarm pivot nut | 47–54 ft-lb | 64–74 Nm |
| Rear shock upper bolt | 29–36 ft-lb | 39–49 Nm |
| Rear shock lower bolt | 29–36 ft-lb | 39–49 Nm |
| Linkage pivot bolts | 36–43 ft-lb | 49–59 Nm |
| Front brake caliper bolts | 18–22 ft-lb | 25–30 Nm |
| Front brake disc bolts | 11–15 ft-lb | 15–20 Nm |
| Rear brake caliper bolts | 18–22 ft-lb | 25–30 Nm |
| Rear brake disc bolts | 11–15 ft-lb | 15–20 Nm |
| Engine upper mount bolt | 29–36 ft-lb | 39–49 Nm |
| Engine lower mount bolt | 36–43 ft-lb | 49–59 Nm |
| Subframe bolts | 18–22 ft-lb | 25–30 Nm |
Use these specs as your go-to reference for every maintenance event on the 2019 Honda CRF150R. A bike torqued correctly throughout stays consistent and competitive race after race.
Related Shopping Categories
Shop Torque Wrenches for a 2019 Honda CRF150R Dirt Bike.
Shop Wrenches and Sockets for a 2019 Honda CRF150R Dirt Bike.
Shop Thread Locker for a 2019 Honda CRF150R Dirt Bike.
Shop Additional Tools for a 2019 Honda CRF150R Dirt Bike.
Shop Penetrating Oil for a 2019 Honda CRF150R Dirt Bike.
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.
