2019 Beta 390 RR Race Edition Dirt Bike Torque Specs
Shop parts for a 2019 Beta 390 RR Race Edition Dirt Bike.
The 2019 Beta 390 RR Race Edition gains improved clutch feel and ergonomic updates alongside the competition-grade equipment. The 389cc liquid-cooled DOHC four-valve single with EFI and six-speed gearbox continues to deliver the mid-displacement power that makes the 390 a versatile choice for competitive enduro racing. Improved clutch engagement is particularly valuable in the Race Edition — competition riders depend on precise clutch control for tight section navigation, and the updated feel provides more consistent modulation under race pressure. The chrome-moly steel frame, KYB fork, and Sachs shock maintain the proven chassis. Torque discipline across every system ensures the 2019 improvements translate into better race results.
Engine Torque Values
| Fastener | Torque (Nm) | Torque (ft-lbs) |
|---|---|---|
| Spark Plug | 12 | 9 |
| Cylinder Head Bolts | 45 | 33 |
| Cylinder Base Bolts | 25 | 18 |
| Valve Cover Bolts | 10 | 7 |
| Cam Sprocket Bolts | 12 | 9 |
| Oil Drain Plug | 20 | 15 |
| Oil Filter Cover Bolts | 10 | 7 |
| Flywheel/Rotor Nut | 75 | 55 |
| Clutch Hub Nut | 75 | 55 |
The updated clutch materials and spring rates improve modulation but don’t change the 75 Nm hub nut specification. After any clutch service to inspect the updated components, verify the hub nut to ensure the improved engagement characteristics are preserved.
Suspension & Chassis
| Fastener | Torque (Nm) | Torque (ft-lbs) |
|---|---|---|
| Swingarm Pivot Bolt | 70 | 52 |
| Lower Triple Clamp Pinch Bolts | 12 | 9 |
| Upper Triple Clamp Pinch Bolts | 20 | 15 |
| Handlebar Clamp Bolts | 15 | 11 |
| Shock Upper Mount | 50 | 37 |
| Shock Lower Mount | 50 | 37 |
| Linkage Bolts | 40 | 30 |
| Subframe Bolts | 25 | 18 |
| Engine Mount Bolts | 45 | 33 |
Drivetrain & Wheels
| Fastener | Torque (Nm) | Torque (ft-lbs) |
|---|---|---|
| Front Axle Nut | 50 | 37 |
| Rear Axle Nut | 100 | 74 |
| Front Sprocket Bolt | 50 | 37 |
| Rear Sprocket Nuts | 30 | 22 |
| Chain Adjuster Lock Nuts | 18 | 13 |
Brakes
| Fastener | Torque (Nm) | Torque (ft-lbs) |
|---|---|---|
| Front Caliper Bolts | 30 | 22 |
| Rear Caliper Bolts | 25 | 18 |
| Front Disc Bolts | 10 | 7 |
| Rear Disc Bolts | 10 | 7 |
| Front Master Cylinder Clamp | 10 | 7 |
| Rear Master Cylinder Mount | 10 | 7 |
Dry vs. Wet Torque
Oil drain plug: always wet; reduce 15–20% with sealant. All other values assume dry threads.
Thread Locker Points
Medium-strength (blue) thread locker for the 2019 Beta 390 RR Race:
- Rear sprocket nuts
- All disc bolts
- Linkage bolts
- Subframe bolts
- Exhaust header bolts
- Skid plate bolts
Refresh every 10–15 hours of competition use.
Torque Wrench Selection
A 3/8-inch drive click-type for 20–100 Nm and a 1/4-inch drive for 10–12 Nm hardware. Two drive sizes for the improved 390cc Race Edition.
Related Shopping Categories
Shop Torque Wrenches for a 2019 Beta 390 RR Race Edition Dirt Bike.
Shop Wrenches and Sockets for a 2019 Beta 390 RR Race Edition Dirt Bike.
Shop Thread Locker for a 2019 Beta 390 RR Race Edition Dirt Bike.
Shop Additional Tools for a 2019 Beta 390 RR Race Edition Dirt Bike.
Shop Penetrating Oil for a 2019 Beta 390 RR Race Edition Dirt Bike.
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.
