I bought this month ago and it is really good for breakin Rc.motor
Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!Write Your Review
Love this stuff, great premix, been using for years, never had an issue.
I usually go through one of these per hare scramble season on my YZ250. If you race and rebuild often, you will be extremely thankful for this oil versus something like Castor. Internal surfaces are spotless. The piston and rings look great, no carbon buildup. Zero complaints with this oil, and while it is a little pricey up front (this big jug is the best deal), I believe it offers the best protection and performance out there.
Been running this in stock 250cc smokers to big bore highly modified 2-strokes as long as I can remember. Probably since 1999-2000 or so. Had problems with other oils on mod motors but never a problem with this. 32:1 all day for years.
Will not use any other type... worth the money
Got our jet kit from LCP and he recommends this oil so that's good enough for me. We mix at 40:1 and it runs clean and we never foul plugs.
Ive always used motul oils! they have their formula down! My bikes show minimal wear due to good lubrication properties. Motul is the best!
I have used Motul in my son's race bikes for the past 6 years. Even after going beyond the recommended hours for rebuilding the top end wear is almost non-existent with ring gaps being very close to the installed gap and cylinder wear is not noticeable.
We have used Motul for the past 5 years in our race bikes. When replacing top ends, I have noticed that ring gaps remain in spec and cylinder wear is almost non-existent. Have one bike with over 100 hours on crank riding mx and bearings are still tight and cylinder in excellent shape.