Adjustable Factory Triple Clamps

• Product Details

  Husqvarna Technical Accessories Factory Racing Triple Clamp.

  • Made of highest grade aluminum.
  • Perfectly tuned stiffness of the steering stem.
  • 100% alignment of the fork tubes.
  • Perfect flexibility.
  • Precisely adapted to the Husqvarna WP fork.
  • Spun fork clamping after anodizing: This machining process increases the friction between the triple clamp and the fork tubes, with constant tightening torque, thus preventing twisting of the fork tubes in the triple clamp to a great extent.
  • The special steering stem support additionally boosts this effect.
  • Quick and easy offset adjustment between 20 mm or 22 mm: Disassembly of the front wheel and fork is NOT necessary.

  The triple clamp-offset is the distance of the horizontal center line of both fork tubes to the center of the steering axis, about which the fork legs are offset from the steering axis (referred to as dimensionX). The offset set can be seen at a glance by the marking on the triple clamp.

  Offset adjustment options:

  • Shorter offset: Stability on short straights.
  • Longer offset: Easier and faster turning into bends.

  Note: Handlebar support 789.01.939.044 / 144 / 244 / 344 / 444 or the PHDS SXS.14.125.200 is additionally required (and sold separately) for installation on TC 125/250 and FC models as of 2016.

  Report Incorrect Product Information

  ---

  Read More

• Customer Reviews

• Q&A

• Fitment

• # Part Numbers

  Product Variant	Manufacturer Part #
  Black / 20mm/22mm Offset	A46001999021C1A
  Blue / 14/22mm Offset	2620199902168
  Blue / 20mm/22mm Offset	A4600199902168A

Find More