Contact Us
Orders over $79.00 will receive free shipping. This is a residential delivery service, deliveries Monday through Friday from 9:00am to 8:00pm.
Learn More
The G2 Threaded Handguard Mounts provide a strong outer handguard mount that stays put! Conventional handguard outer mounts (securing handguard to handlebar end) have never really done the job. The old school bolt-nut-rubber hose solution simply does not provide the strength necessary. One slow speed tip-over and your guards can move substantially. The more current aluminum split-wedge design is very strong, but vibration will loosen them very quickly. The bolt need only loosen about 1/8 turn and the wedges lose all strength and the handguard "pops out"!
The G2 Threaded Handguard Mounts are a twist on an old Enduro rider solution from the early 80's. By tapping the inside of the handlebar, a threaded piece can be inserted to securely bolt the handguard to the handlebar end. All previous solutions involved steel which can corrode to the bolt and cause long term problems. The G2 Threaded Handguard Mount is made from a high-strength nylon material. The nylon is tapped in such a way that it acts like a lock-nut - your handguard bolts will never vibrate loose! In addition, nylon has better vibration absorption qualities that steel or aluminum.
G2 Threaded Handguard Mounts are used by more professional off-road athletes than ALL other threaded handguard mount brands combined!
For Renthal Twinwall handlebars ONLY, a 11/16x16 tap is needed for installation (sold separately).
For all other aluminum handlebars, a 5/8x11 tap is needed (sold separately). A handy tapping guide is included to insure easy, straight alignment with your handlebar.
| Product Variant | Manufacturer Part # |
|---|---|
| Most Aluminum Handlebars | 60-310 |
| Renthal Twinwall / Current YZF/YZ/WR Stock Handlebars | 60-330 |