Shopping CartCLOSE
Shop 2020 Riding Gear For Dirt Bike And Street Bike >
Devol Transformer Pull Rod
Devol Transformer Pull Rod


Description See Also: 5 Reviews 7 Questions Fitment Part Numbers
Item #DEV000D

Read More
5 Reviews
3.6 out of 5 stars
5 Star   3 4 Star   0 3 Star   0 2 Star   1 1 Star   1
All Reviews
Keppy Verified Purchaser
Over 8 months ago Galt,ca
Durability5/5Ease of Installation5/5Performance5/5Style4/5
Love the adjustability

I’ve been riding my 2014 yz450 for 2yrs love the bike but height and maneuverability were ok at best. Bought the Devol suspension link and now it turns on a dime , height is where I want it . Night and day difference. Incredible product to say the least.

Justin Verified Purchaser
1 year 1 month ago Connecticut
Durability1/5Ease of Installation5/5Performance1/5Style4/5
Does not fit a 2007 yz250f

The stock bearing for my bike was too small to fit in the devol trans arm. There was too much play and water would easily get in there to ruin the bearings. It DOES NOT FIT on a 2007 yz250f. I was even told by DEVOL to buy a stock inner bearing cause the one I had was wrong but it still didn’t fit. So now I’ve wasted even more money and can’t get it back.

Skerg Top 250 Verified Purchaser
Over 3 years ago Colorado
Durability5/5Ease of Installation5/5Performance5/5Style5/5
Great product

This helped the handling on my 2014 and 2016 yz 450.

Over 5 years ago SPOKAVEGAS WA
Durability5/5Ease of Installation5/5Performance5/5Style5/5

I put it on my 2014 YZ 250f. Amazing difference. I'm running the 4th setting. Brought the rear end down a little and made a huge change in cornering. Bike tracks out perfect on the flat corners and also holds its line easier. I race B class. I cant believe I haven't used one before this bike.

Over 5 years ago Alabama
Durability3/5Ease of Installation4/5Performance1/5Style4/5
R & D must have skipped this

Installed it on my YZ450, I can use three of the five positions, four and five put the shock spring into the swing arm.

7 Questions
Answered:   6
Not Yet:   0
Q: If I set this at the stock position will it still make my Bike handle better?
3 months 6 days ago
Q: How much can this lower 2010 yz450fx?
1 year 2 months ago
Top 10
1 year 2 months ago
A: This at position 5 will lower the seat down 22mm on your Yamaha
Q: Will this be able take big jumps? And will It mess up my engine if put in on?
2 years 6 months ago
Expert MotoSport Staff
2 years 6 months ago
A: This will not mess up your engine if you put it on your bike. You will also be able to go as big as you want, this will actually help your bike handle much better!
Q: Will this work on my 2004 crf250r with a 2008 crf250 rear shock ?
Over 4 years ago
Expert MotoSport Staff
Over 4 years ago
A: Yes. Both the 2008 and 2004 Honda CRF250R use the same Devol Transformer Pull Rod (0116-1201).
Q: Please can you advise if this product will raise the rear end / ride height on my yamaha wr450f ? Thanks
Over 5 years ago
Expert MotoSport Staff
Over 5 years ago
A: Yes, This link will allow for customization of suspension action. You can Lower rear and soften linkage ratio by lengthening pull rod or Raise rear and stiffen linkage ratio by shortening linkage arm.
Q: How much will this raise a kx 85 i would like to make the bike taller
Over 5 years ago
MotoSport Staff Expert
Over 5 years ago
A: This would not be intended to make your Kawasaki KX85 taller. It would make your bike handle better but it would not raise the seat height on your bike.
Q: How far will it lower the rear end of the bike?
Over 6 years ago
I saw some of the other brands of rear linkage lower about 10mm in the rear. I did not see in the description of the Devol link of how far it will lower the rear end.
Over 6 years ago
A: Roughly an inch to an inch and a quarter.
MotoSport Staff
Over 6 years ago
A: This will either raise or lower the bike. The actual height will vary depending what bike it is for and what setting is used. It also changes the action of the linkage and modifies the ratio that allows the rear end to track differently depending on what setting is used on the linkage. If you are looking to lower the bike, Devol has specific lowering links available also.

See all bikes that this part fits...

See Fitments
# Part Numbers
Product Variant Manufacturer Part #
Black 0116-1201
Black 0116-1202
Black 0116-2502
Black 0116-4701
Black 0116-4702
Black 0116-5501
Black 0116-5502
Black 0116-3301
Black 0116-3302
Black 0116-2501
Black 0116-4703
Black 0116-2503
Black 0116-3304
Devol Transformer Pull Rod 0116-2504
Added to your cart