Looks good and great concept for Handguards to fit Fasst Flexx Bars. However, the holes and screws are a missmatch. Just get some 3/4" #8 screws, washers, lock nuts and your done.
- 6 reviews
- 0 reviews
- 2 reviews
- 1 reviews
- 1 reviews
I didn’t like the way it was designed. Could have used more thought in engineering. It’s like rigging up makeshift hand guard for handlebars that cost 350$
The holes for the hand guards weren't tapped all the way threw the aluminum bracket on both pieces.. Run a tap threw to save you a HEADACHE...
Easy install on fasst flex bsrs
This is the gold standard on dirt bikes.
rode a friends bike that had these bars and it was a night and day difference they feel awsome
Work great with flex bars. Took minutes to install.. Took a few trees out and they held up great... Would definitely recommend for trail riders.
I OVER NIGHTED THESE TO GO ON MY FLEXX BARS FOR A WEEKEND XC RACE. EVERYTHING ASSEMBLED EASILY UNTIL I TRIED TO FIT THE BAR END. IT GAVE ME 2 TYPES OF BAR END INSERTS FOR 7/8" AND 1 1/8" BARS. BOTH WERE TO LARGE. IN A PINCH I TOOK OUT THE DRILL TO MAKE MY BAR END A SIZE LARGER AND THE 7/8" END WAS ABLE TO BE USED WITH A LITTLE WD40 AND A RUBBER MALLET. OVER ALL THEY ARE GREAT HANDGUARDS AND FIT WELL AFTER THE DRILLING BUT I WASNT EXPECTING TO HAVE TO DRILL AND THE INSTRUCTIONS DONT SAY ANYTHING ABOUT IT EITHER.
- Answered: 6
- Not Yet: 0
Question asked by Austin
Question:Q: Do these for on Renthal fat mx bars?Question asked 1 year 4 months ago
Question answered by rknightUser's contributor status: Top 25Question answered 1 year 4 months agoAnswer: A: This kit is specifically for the flexx bars. We do carry the other kit to fit oversized bars.
Question asked by tiuracing
Question:Q: Does this kit come with both sides and all the hardware to put them on my flexx barsQuestion asked Over 4 years ago
Question answered by MotoSportExpertUser's contributor status: Top 10Question answered Over 4 years agoAnswer: A: Yes, the Cycra Pro Bend Kit Flexx Bar comes complete for both sides of a machine that has the Fasst Brand flex bars installed.
Question asked by leonidise
Question:Q: Will these fit on protaper atv midsQuestion asked Over 5 years ago
Question answered by MotoSportGrantKUser's contributor status: MotoSport StaffQuestion answered Over 5 years agoAnswer: A: No, this kit will include mounts for Flexx bars and will not work on Pro Taper Bars. Cycra does offer the Pro Bend Kit for Pro Taper bars, but we would need to know if you have 7/8" or 1 1/8" bars. If you could give us a call at 888-676-8853 we would be happy to help you with your order.
Question asked by ferlier47
Question:Q: Does it mount to atv specific flexx bars only or will they work on motorcycle bend/width as well?Question asked Over 9 years ago
Question answered by JesseCUser's contributor status: MotoSport StaffQuestion answered Over 9 years agoAnswer: A: yes these are specific for the ATV bend of Flexx bars, we do offer the kit for the MX bars as well.
Question asked by apeezie
Question:Q: Do you need any special mounting hardware?Question asked Over 10 years agoDoes this package come with all the necessary hardware to bolt to the flexx bars? Or do you have to buy the BRP mount?
Question answered by james718User's contributor status: MotoSport Staff ExpertQuestion answered Over 10 years agoAnswer: A: This is the handguard kit that Cycra puts out to fit specifically the Flexx bars.
Question asked by foxracing95h
Question:Q: Does this attatch to the hand grips?Question asked Over 10 years ago
Question answered by james718User's contributor status: Expert MotoSport StaffQuestion answered Over 10 years agoAnswer: A: The Pro bend kit fits the Fasst Flexx Bar only, and attaches to the ends of the handlebar.