empty
Shopping CartCLOSE
Shop 2020 Riding Gear For Dirt Bike And Street Bike >
Husaberg Blue
Husaberg Blue

$62.99 $82.99
24% Off - Save $20.00

Description See Also: 32 Reviews 13 Questions Part Numbers
Item #CYC000P

Read More
32 Reviews
4.3 out of 5 stars
5 Star   19 4 Star   6 3 Star   5 2 Star   0 1 Star   2
All Reviews
JimE Verified Purchaser
4 months 6 days ago IN
Quality Parts

I like these enough that I have bought a second set for another one of my trail bikes. I've read other reviews that say they are difficult to install, but I didn't have any issue. I like the look and the superior protection that they offer.

Malcom Howie Verified Purchaser
4 months 26 days ago Lynnwood, Washington
Lower wuality

I bought a set of these for my other KTM, the quality has gone down. Firstvoff, the screw holes that hold the crash savers as well as the plastic shields all had to be redrilled out so they would line up and fit. Still fit poorly. The bar end hardware is garbage as well. I really expected a higher quality product. I should of bought the most expensive ones, maybe the quality would be better. The first set i bought was delivered to the wrong address or got lost. Motosport was great and sent me a new set, no questions asked. They always go the extra mile for their guests. Thank you Motosport. Please touchbase with Cycra and their QA Dept.

waynedalemafia Verified Purchaser
Over 6 months ago Fort Wayne, IN, USA
Super solid mount

I just got theses and they mount to the triple clamp on my bike and they are solid as a rock and mounting was simple

JSrider Verified Purchaser
Over 6 months ago
Good product - Bad Quality Control

I picked these because I've used them before and they do a good job at protecting things. The problem comes during installation. I had to open up the holes on the end of the guard because the bolt wouldn't fit through it. The holes for the side plastic pieces also didn't line up and the self tapping screws they give you for mounting the plastics are junk. I think next time I'm in the market for handguards I'll consider something else.

Lucas Verified Purchaser
Over 6 months ago Clanton AL
Strong product, hard Install!

It should be a very simple install but nothing fit correctly, the plastic’s didn’t line up with the holes. It is a quality product just may take longer than planned to install, grab extra screws before you start.

RealOG
Over 6 months ago Cheyenne, Wy
MIssing parts

I just got these hand guards, they seem dope, good color and solid build but they do not come with the bar mounts of any kind. I do not know if I just missed that in the description or what but I was kinda needing to install these right away for a tight race and now I have to wait for more parts to come in

Maggpyer Verified Purchaser
Over 7 months ago Northern Virginia
Noob review

I gave 4 out of 5 stars only for the reason that the plastic was super hard to mount. Holes didn’t quite line up and screws were very hard to drive into the aluminum bar. Other than that I’m very well pleased with the look, finish, and durability of these hand guards. I’ve had others that would have been “misshapen” from the drops I had on her today. A great product by Cycra and great service from number one online store for your motorcycle needs!

Sean johnson
Over 7 months ago Cleveland
I ride street saved my life and hand

Got into head on collision drunk driver sitting in middle of road hand guards meant and snapped rebounding my bike although they broke they saved every part of the throttle clutch forks and when I say I crashed hard it was about 60 on a yz 250 I got away with huge bruising great product this product can and will save your bike and your bikes life

Rider13
Over 8 months ago Lincoln, NE
Work Really Well!

I bought these after I had a tip over and broke a lever. They look really good and provide great protection with plenty of room for hands and levers. I had a minor crash on some gravel, I probably would have broke or bent a lever but I didn’t because of the guards. They are a little scratched in one spot, but that’s my fault. The only reason I gave 4 stars instead of 5 was because they didn’t come with the stickers that were shown in the picture so they look a little plain. But other than that they are great!

Tdaniels Verified Purchaser
Over 9 months ago Washington
Great

Have had on every bike I've owned. Saved my hands more times then I can count

See 10 More Reviews
13 Questions
Answered:   12
Not Yet:   1
Penroid
Q: Will they fit on a honda crf250l
4 months 26 days ago
Isaac
Top 10
4 months 26 days ago
A: The item is not model specific. You should be able to use it with the stock bars but you will have to purchase the mounts or you can order the Cycra Pro Bend Kit that you will include the mounts.
jackie898
Q:  Does it come with the handlebar mount  and if it doesn’t watch one do I get 
Over 8 months ago
Deuce
Verified Purchaser
Over 8 months ago
A: They do not come with the handlebar mount. You would need to order the Cycra Pro Bend kit. There is a drop down list of different clamps to choose from depending on your size and model of handlebar (for example: renthal, magura, or pro taper).
Faithk
Over 8 months ago
A: It does not come with the mounts. 
Brodiehammy
Q: I have pro tapered bars and wondering if this will clamp on.
1 year 2 months ago
DaveGearhead
Top 1
1 year 2 months ago
A: Yes, as long as you are not running them on a mini.
Ethan
Q: Will these fit on my stock hand bars for my 1998 xr 70 r
1 year 3 months ago
Michael
Top 10
1 year 3 months ago
A: Yes, they work great!
Brrrraapp
Q: What mounting kit for stock bars on 2008 ktm 200xc?
2 years 11 months ago
Thad
Q: Can I buy just new plastics?
2 years 11 months ago
Is there an option to just purchase new white plastics and the black side piece?
MotoSportExpert
Expert MotoSport Staff
2 years 11 months ago
A: Yes the Cycra Pro Bend Classic Enduro Replacement Shields can be found here:

http://www.motosport.com/cycra-pro-bend-classic-enduro-replacement-shields
colton
Q: Will they fit renthal 1 1/8 handle bars
Over 3 years ago
MotoSportExpert
Expert MotoSport Staff
Over 3 years ago
A: Yes. Just make sure to choose the correct mount kit. The complete kit with mounts can be found here:
http://www.motosport.com/cycra-pro-bend-kit

Also, feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
gman
Q: Would these fit the Renthal 971 bend handlebars?
Over 3 years ago
MotoSportExpert
Expert MotoSport Staff
Over 3 years ago
A: Yes the Cycra Pro Bend Handguards will work with Renthal 971 bend handlebars.
hondaboy
Q: Dose this come with both handguards
Over 3 years ago
MotoSportExpert
MotoSport Staff Expert
Over 3 years ago
A: Yes the Cycra Pro Bend Handguards are sold as a pair.
Jayson
Q: What bar mount
Over 4 years ago
What mount kit should I use for these with my rental fat bars
MotoSportExpert
Expert MotoSport Staff
Over 4 years ago
A: For the Renthal Fat Bar you would want to use the "U-Clamp -'07 Pro Taper / Most 1-1/8".
1 - 10 of 13
# Part Numbers
Product Variant Manufacturer Part #
White 1CYC-7500-42
Natural 1CYC-7500-02
Black 1CYC-7500-12
Orange 1CYC-7500-22
Red 1CYC-7500-32
Yellow 1CYC-7500-55
Blue 1CYC-7500-62
Green 1CYC-7500-72
Husaberg Blue 1CYC-7500-88
Added to your cart
CLOSE