empty
Shopping CartCLOSE
  • Your cart is empty.
FREE 2-DAY SHIPPING ON ORDERS OVER $49
Competition Werkes Fender Eliminator Kit - Standard
Competition Werkes Fender Eliminator Kit - Standard

$ 49.95 - $ 169.95

Item #CWE0001

Read More
21 Reviews
4.5 out of 5 stars
5 Star   13 4 Star   6 3 Star   2 2 Star   0 1 Star   0
Write a Review

Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!

Write Your Review Write a review to win $500
All Reviews
Verified Purchaser
Texas
Worked great on my 06 Ninja 650R

This kit is perfect. It looks so much better than the stock fender. The instructions were easy enough to understand and the new turn signals are smaller and brighter than stock (the packaging had a warning that the turn signals might not be DOT approved). On my bike it required drilling two holes to rout the new wiring, but the instructions were precise and easy to follow (included pictures).

Atlanta, GA
Expensive; instructions not great.

Bought this and installed it on my 2002 SV650. Looks good once installed and does what it’s meant to. The instructions though are not great and the pictures provided to show where to make cuts are not good quality, leaving a lot to chance when cutting. Additionally, you’re essentially paying $135 for a few metal brackets and a license plate light. Although the brackets are high quality, I feel that the kit could be a fraction of the price for what you pay for.

Verified Purchaser
Illinois
Exactly what I was looking for...

Competition Werkes.... Need I say more? Awesome quality and really cleans up the rear end of my CBR. Exactly what I was looking for.

Kitchener, ON, Canada
08' ZX-10R

Instructions were a bit terse and the pictures were difficult to view due to poor photocopying.The quality of the actual product is decent outside of 3 complaints:

1) The wires don't seem to be well protected. I'll see how they hold up after a season.

2) I had to drill holes into the lc holder because the holes didn't match up with my plate

3) license plate light is too close to the plate leaving it poorly lit (which is good or bad I guess)

Overall, the product is adequate and delivers as advertised but I expected a bit more for the price paid.

Minneapolis, MN
Looks Great

I purchased this product for my 2009 FZ6R, and I really like it. It was fairly easy to install because the tool kit my bike came with was all that was needed. My bike looks so much better without the stupid plasctic fender sticking off the back! The only thing I did not like was the blinker wire connectors. They do not just snap into place, you have to use adapters provided in the kit.

Good Buy

This product is definitely a good buy, fair price, makes the bike look way better. Shipping was extremely fast, very impressed. Only thing that i wasnt satisfied with was the install, kind of a pain, other then that this product is fantastic and i would recommend it to anybody.

ALBANY,NY
Nice Item

Nice item that was easy to install on a 2006 Yamaha FZ6. The replacement blinkers are kinda cheesy but it will be easy to upgrade when we find a better choice.

Florida
Pricey but works and looks good

Not a lot to it for the price but it is good quality and does look nice.

2003 cbr 600 f4i

Azusa, CA
Smart purchase

its easy to install. o and it gives u a awsome look. thumbs up!!!

philadelphia, pa
Nice piece

I bought this for my '04 yamaha fz6 as a replacement for what was on there. It fits great. Easy to install.
Only complaint was it didn't come with led bulbs. It came with incandescent ones. And the plate light is a pain to change. But I love it

See 10 More Reviews
19 Questions
Answered:   19
Not Yet:   0
_blazin_asian
Q: Does this fender eliminator inlcude turn signals or can it use the oem turn signals for a 2005 Ninja 250R?
1 month 24 days ago
robert
Top 10
1 month 24 days ago
A: Short stalk or flush mount turn signals included for most models. Most kit installations will require cutting and splicing of wires.
_blazin_asian
Q: Any modifications needed for install on for an '88-'07 Ninja 250R?
2 months 1 day ago
DaveGearhead
Top 10
2 months 1 day ago
A: No cutting, drilling or splicing is required to install this Kawasaki 250 fender eliminator.
George Poly
Q: Any mods needed for a 2012 VFR 1200F?
4 months ago
Michael
Top 10
4 months ago
A: Notes: Most kit installations will require cutting and splicing of wires. Some cutting and drilling may be necessary on some models, but only to the black plastic fender, never the frame or bodywork.
elirix
Q: The Motosport site states that this item is compatible with my '99 Suzuki SV650, however I see a lot of comments here from people with newer bikes. Can you please confirm that this fender eliminator will work on my SV? Thank you!
Over 5 months ago
TylerGearhead
Top 10
Over 5 months ago
A: I confirmed on the manufacturer site that this fits your 1999 SV650. Manufacturer part number 1S650
Lilorvis
Q: Just to clarify, does this kit integrate the brake lights and turn signals on a 2002 SV650?
Over 5 months ago
DaveGearhead
Top 10
Over 5 months ago
A: This is not a tail light integration kit. It only eliminates the rear fender and offers a different place to mount the turn signals and license plate light.
AdamSuga
Q: Will there be any cutting or drilling required for my 2015 fz6r? is there a better product available for me ?
Over 3 years ago
MotoSportExpert
MotoSport Staff Expert
Over 3 years ago
A: Some cutting and drilling of the body may be necessary on your 2015 Yamaha FZ6R. The Competition Werkes Fender Eliminator Kit is a good kit and one I would recommend and run myself. Also, feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
JDdd
Q: For the 2007 kawasaki zzr, does the kit come with new/low profile turn signals? Does it require cutting? Does it change the storage compartment?
Over 4 years ago
MotoSportExpert
Top 1 Contributor
Over 4 years ago
A: The Competition Werkes Fender Eliminator Kit - Standard for your 2007 Kawasaki ZZR600 will reuse the stock OEM turn signals. Some cutting and drilling may be necessary on some models, but only to the black plastic fender, never the frame or bodywork.
Ernesto
Q: Will this kit a 1996 suzuki gxs600f?
Over 4 years ago
I am working in repairing/upgrading a 1996 Suzuki gxs600f. Will I need to leave the rear fairing on to install this kit?
MotoSportRyanT
MotoSport Staff Expert
Over 4 years ago
A: Unfortunately, this fender eliminator kit is not designed to fit your 1996 Suzuki GSX600F Katana.
John
Q: What is the best fender eliminator with turn signal lights for 2012 fz6r
Over 5 years ago
MotoSportExpert
MotoSport Staff
Over 5 years ago
A: It will depend who you ask on which kit is said to be the best. I have always had great luck with the Competition Werkes kits and they do have their setup available for your model. It includes short stalk turn signals and an LED license plate light. For your 2012 FZ6R, installation take about an hour.
Henrik
Q: Lightningsystem and cuting on honda cbr 600 f4i 2001
Over 5 years ago
Do you use the old rearlight or is it with an new rearlight (taillight)?. Do you need to cut/drill or make anny big modification to the bike, when you remove the stock and installing this new fender kit on an honda cbr 600 f4i 2001 mod? or is it simply to unscrew the old and screw in this new one? i know the locking system for the rear seat have to be modified, but annything els?
MotoSportExpert
MotoSport Staff
Over 5 years ago
A: This will utilize the stock taillight and does not include a new one. Here is Competition Werkes description of the modifications required :

"With the F4i.... The black plastic undertail does have to be trimmed off in order to mount this kit. There is no modification to the frame or subframe. The locking mechanism to the rear seat will get modified... But, can easily go back to stock."
1 - 10 of 19
Fitment

See all bikes that this part fits...

See Fitments
# Part Numbers
Product Variant Manufacturer Part #
No Turn Signals N/A
No Turn Signals / OE Exhaust Only N/A
Turn Signals N/A
Turn Signals / Biposto N/A
Turn Signals / Monoposto N/A
Turn Signals 1A1004
Turn Signals 1B1000
Turn Signals 1D1199
Turn Signals 1D1299
Turn Signals 1DHYP2
No Turn Signals 1DMON2
No Turn Signals 1DMON3
Turn Signals 1DMON4
Turn Signals 1DSCR
Turn Signals 1DSTF
Turn Signals 1H1002
Turn Signals 1H1003
No Turn Signals 1H1200
Turn Signals 1H125
Turn Signals 1H250
Turn Signals 1H300
Turn Signals 1H607
Turn Signals 1H608
Turn Signals 1K1002
Turn Signals 1K1004
Turn Signals 1K1005
Turn Signals 1K300
No Turn Signals 1K500
Turn Signals 1K609
Turn Signals 1K651
Turn Signals 1K652
Turn Signals 1K800
Turn Signals 1KT1190
Turn Signals 1KT1290
Turn Signals 1KT390R
Turn Signals 1KT690
Turn Signals 1KT990
No Turn Signals 1S1006
Turn Signals 1S650
No Turn Signals 1S758
Turn Signals 1T1051
Turn Signals 1T678
Turn Signals 1T679
Turn Signals 1Y1010
Turn Signals 1Y300
Turn Signals 1Y700
Turn Signals 1Y800
Turn Signals 1Y900
No Turn Signals 1H603
No Turn Signals 1H604
Turn Signals 1H605
Turn Signals 1H954
No Turn Signals 1K604
No Turn Signals 1K1000
No Turn Signals 1K12
No Turn Signals 1K14
Turn Signals 1S604
No Turn Signals 1S754
No Turn Signals 1S755
No Turn Signals 1S756
Turn Signals 1S1300
Turn Signals 1Y605
Turn Signals 1Y606
Turn Signals 1Y607
No Turn Signals 1Y1001
No Turn Signals 1Y1004
Turn Signals 1Y1007
Turn Signals 1K607
Turn Signals 1K650
No Turn Signals 1K252
Turn Signals 1K1001
No Turn Signals 1S757
Turn Signals 1Y608
Turn Signals 1K608
Turn Signals 1D1098
Turn Signals 1Y609
Turn Signals 1Y1009
Turn Signals 1T1050
Turn Signals 1T676
No Turn Signals 1K1003
No Turn Signals 1DDVL
No Turn Signals 1K1101