Air Filter Cleaning & Replacement Guide for 2013 Husaberg FE350
Shop parts for a 2013 Husaberg FE350 Dirt Bike.
The 2013 Husaberg FE350 is renowned for its potent blend of lightweight handling and high-performance output. To keep your FE350 running at its best, regular air filter maintenance is non-negotiable. The air filter's role is to safeguard the engine from harmful dirt and debris while ensuring an optimal flow of clean air – a must for consistent horsepower and throttle response.
Why Air Filter Maintenance Matters on the FE350
- High airflow twin-layer foam: The FE350's air filter uses dual-stage foam construction, maximizing air intake while filtering fine dust & large particles. This feature is critical, especially in off-road environments where dust and debris are prevalent.
- Easy access for service: The air filter is positioned for easy removal beneath the seat, streamlining routine cleaning and inspection.
- Model-specific notes: Early 2013 FE350 models experienced concerns with the fitment and sealing of the air filter, making proper alignment and seat seal even more important to avoid unfiltered air from entering the intake.
How to Clean the Air Filter: Step-by-Step
- Remove the seat using the quick-release system.
- Carefully pull out the air filter cage assembly from the airbox. Inspect the airbox for debris and clean as needed.
- Gently detach the foam air filter from its cage.
- Cleaning: Place the dirty filter in a bucket with a quality foam filter cleaner or a mild degreaser. Squeeze (do not wring) the filter repeatedly until dirt and oil are dissolved. Rinse thoroughly with clean water and allow to fully air dry away from direct sunlight.
- Inspect the filter for any tears or deterioration. Replace immediately if damaged.
- Oiling: Once dry, evenly apply air filter oil throughout the foam, working it in thoroughly. Proper oiling is essential to trap the finest dust particles.
- Wipe down the airbox, especially the sealing surfaces, before reinstalling the filter. A light smear of waterproof grease around the sealing flange helps prevent dust from bypassing the filter – especially important for 2013 FE350 units due to early known sealing issues.
- Reinstall the filter onto the cage and securely seat it in the airbox. Confirm correct placement and a firm seal all around the edge.
- Reinstall the seat, ensuring it latches firmly.
When to Replace the Air Filter
- Replace if: The filter shows tears, permanent stains, stiff or crumbling foam, or if the sealing surface is compromised.
- As a guideline, aggressive riders or those operating in dry, dusty conditions may need to clean or replace the filter after every ride. More moderate or infrequent use can extend intervals, but always inspect before each outing.
2013 FE350-Specific Maintenance Tips
- Sealing concern fix: Due to early fitment issues, monitor the filter-to-airbox seal after installation by running a finger around the edge and inspecting for visible gaps. Any sign of dirt past the seal means immediate attention is needed.
- Filter cage check: Ensure the cage is not warped or cracked, as this can compromise the sealing surface. Replace as required.
- Use dual-stage filters: Filters specifically designed for the 2013 FE350 are recommended, offering superior protection and compatibility.
Proper, routine air filter service doesn't just protect your engine – it preserves throttle response and ride enjoyment while extending component life of your high-performance Husaberg.
Related Shopping Categories
Shop Air Filters for a 2013 Husaberg FE350 Dirt Bike.
Shop Air Filter Oil for a 2013 Husaberg FE350 Dirt Bike.
Shop Air Box Covers for a 2013 Husaberg FE350 Dirt Bike.
Shop Tools for a 2013 Husaberg FE350 Dirt Bike.
Shop Intake Parts for a 2013 Husaberg FE350 Dirt Bike.
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.
