2017 Cobra CX50SR Dirt Bike Torque Specs
Shop parts for a 2017 Cobra CX50SR Dirt Bike.
The 2017 Cobra CX50SR continues the Standard Race 50cc competition platform with updated suspension calibration and improved component quality in its tenth year. A decade of SR development produces a machine with thoroughly validated specifications and reliable parts support. The air-cooled 50cc two-stroke in the competition chassis delivers consistent performance for young competitors who value the Standard Race specification’s balance of genuine competition performance and straightforward maintenance. A decade of SR production means the machine’s service intervals, parts wear patterns, and fastener torque behavior are well understood by the dealer network that supports it.
Engine Torque Specifications
| Fastener | Torque (Nm) | Torque (ft-lbs) |
|---|---|---|
| Spark Plug | 12 | 9 |
| Cylinder Head Nuts | 8 | 6 |
| Cylinder Base Nuts | 8 | 6 |
| Flywheel/Rotor Nut | 25 | 18 |
| Clutch Hub Nut | 20 | 15 |
| Exhaust Flange Nuts | 8 | 6 |
Chassis & Suspension
| Fastener | Torque (Nm) | Torque (ft-lbs) |
|---|---|---|
| Swingarm Pivot Bolt | 22 | 16 |
| Fork Clamp Bolts | 8 | 6 |
| Handlebar Clamp Bolts | 8 | 6 |
| Shock Upper Mount | 18 | 13 |
| Shock Lower Mount | 18 | 13 |
| Subframe Bolts | 10 | 7 |
| Engine Mount Bolts | 15 | 11 |
Wheels & Drivetrain
| Fastener | Torque (Nm) | Torque (ft-lbs) |
|---|---|---|
| Front Axle Nut | 18 | 13 |
| Rear Axle Nut | 28 | 21 |
| Rear Sprocket Nuts | 12 | 9 |
| Chain Adjuster Lock Nuts | 8 | 6 |
Brakes
| Fastener | Torque (Nm) | Torque (ft-lbs) |
|---|---|---|
| Front Caliper Bolts | 10 | 7 |
| Rear Caliper Bolts | 10 | 7 |
| Disc Bolts | 6 | 4 |
Tenth-Year SR Notes
Premix two-stroke — no oil drain plug. A decade of validated specifications; maintain them exactly. A 1/4-inch drive wrench for engine hardware; 3/8-inch drive for chassis fasteners.
Thread Locker Recommendations
- Rear sprocket nuts
- Disc bolts
- Subframe bolts
- Exhaust flange nuts
Torque Wrench Selection
A 1/4-inch drive click-type for engine fasteners and a 3/8-inch drive for chassis hardware. Ten years of proven platform performance is maintained by calibrated tools at every service interval.
Related Shopping Categories
Shop Torque Wrenches for a 2017 Cobra CX50SR Dirt Bike.
Shop Wrenches and Sockets for a 2017 Cobra CX50SR Dirt Bike.
Shop Thread Locker for a 2017 Cobra CX50SR Dirt Bike.
Shop Additional Tools for a 2017 Cobra CX50SR Dirt Bike.
Shop Penetrating Oil for a 2017 Cobra CX50SR Dirt Bike.
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.
