I have used this on my 2015 kx250f and my 2001 rm125 and both bikes have different spokes. This wrench will strip out 7/10 spokes without blinking. It doesnt get a good grip and is not a tight fit either. Spend the money and get a good quality wrench.
Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!Write Your Review
The wrench was super tight on the spokes almost to the point of not fitting. However I was able to get the spokes tight ;)
Works well on my rmz 450. Would recommend.
you always need spoke wrench or two or three
I can honestly say that this is the worst $6 I've ever spent. It's not the price that matters it's the fact that this wrench doesn't fit 3/4 of my spokes and the wrench rounded the other 1/4 of my spokes on my 2012 KX450. I wouldnt recommend this wrench to my worst enemy.
If you ride a bike with spokes, you better have one of these. It's a maintenance item that gets neglected most times because you don't have the correct tool. You will be surprised when you find spokes really do get loose, even though they look fine.
Works as expected but didn't fit the spokes on my 2010 KTM 250SXF. I used a dremel tool to slightly open one end up. Works on my buddies 2008 YZ250F
Neat wrench, but did not fit most of our bikes
One wrench fits all my bikes.
We ride four different bikes, from 50 to 250 cc and with this spoke tool I can tighten the different sized nipples on each bike with just one tool.
There have been no questions asked about the BikeMaster Spoke Wrench.