Shopping CartCLOSE
  • Your cart is empty.
Ride Engineering Bar Mounts
Ride Engineering Bar Mounts

$ 94.95 - $ 104.95

Item #RIG000V

Read More
16 Reviews
4 out of 5 stars
5 Star   10 4 Star   2 3 Star   1 2 Star   0 1 Star   3
Write a Review

Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!

Write Your Review Write a review to win $500
All Reviews
Verified Purchaser


Solid build

fit perfectly on the bike, and definitely feels much more stable than any stock settings

Top 1000
So Far so Good!

Purchased to replace the Stock units that would twist after a fall. Stays put much better than the stock clamps.

Verified Purchaser
Rm125 good fit

Good fit. Reasonable price. Does a good job of keeping bars straight in the triple clamp cushions.

Verified Purchaser
Great product, OK durability

Bought these for my 17’ yz250f, felt great when installed - but the top piece twisted on the second time crashed.

Verified Purchaser

I really like this product. Because in a crash the bars do not twist

Better than stock

Apparently I bent my stock mounts from a few washouts so I bought these for better durability and so far feels sturdy through the bars, easy to install and no problems.

Verified Purchaser
Grafton, MA, USA
No complaints so far

Good product. Only one out there it seems where you dont have to buy triple clamp with it. Sits close to top triple clamp, so wish it was little further away.

Verified Purchaser
San Diego, CA, USA

Great combo with ride engineering triple clamps

Verified Purchaser
Clermont, FL, USA
WAY better than stock!

I have my fair share of crashes and got tired of always having to bend my stock bar clamps back into shape, or at least close to it. I installed these Ride bar mounts and have crashed as hard and harder and these bar mounts really hold up well! I have not had them tweek on me AT ALL! My bars stay straight and true. They look pretty dang cool, too! 1st install on my '09 RMZ250, just ordered 2nd set to replace stock mount on new '14 RMZ450.

See 6 More Reviews
11 Questions
Answered:   10
Not Yet:   1
Q: I bought these for my 2007 RMZ250. Are they supposed to come with the rubbers? If not what else do I need to buy?
12 days ago
Top 10
12 days ago
A: This item fits stock or after market rubber-mounted triple clamps (unless noted). You would need to purchase the rubber cones separately.
Q: Can I use these as an oversized bar mount conversion on an 07’ Kawi KX250? Like to go from 7/8 to 1 1/8?
17 days ago
Dan Gearhead
Top 25
17 days ago
A: Yes, this will allow you to run an oversize 1-1/8th handlebar on stock or Ride Engineering top clamps ONLY.
Q: Triple clamp bolts
Over 8 months ago
How can I buy the bolts that connect the bar mount to the triple clamp? Mine are bent.
Top 25
Over 8 months ago
A: Here is a direct link to the part you are questioning about.
Q: How tall are these am 6'2 and am trying get something a little taller so am not hunch that much
Over 9 months ago
Top 10 Contributor
Over 9 months ago
A: These bar mounts will mimic what the stock sizing offers. If you need, on Ride Engineering's site, the offer a 10mm spacer.

Q: Stock clamp fitment
1 year 9 months ago
I have a 2016 RMZ450 and want to run 7/8'' bars. Will these 7/8" clamps fit my stock triple clamps?
Q: If my stock clamps are not rubber mounted, will these change that? 2013 yz250
Over 3 years ago
Expert MotoSport Staff
Over 3 years ago
A: Yes. This one-piece 1 1/8” bar mount is precision machined from aircraft quality aluminum, with 3mm of adjustability forward or back. This bar mount is a replacement for the stock Yamaha bar mounts and does NOT fit the current Ride Engineering Triple clamps which require bar mount: YZ-BBM00-CA. they are the same height as stock YZ450 bar mounts, add the 10mm taller spacers to equal the 2010-13 250F height. Comes with all necessary mounting hardware and 2-rubber cushions to insolate the handlebars from vibration. Make sure at least 8 theards are visible when the bolt is pushed through from underneath, although 11 is ideal. If less than 8 threads are engaged, purchase longer 7/16" fine thread bolts and/or add/remove washers accordingly.

Application: stock Yamaha YZ250f/450f clamps (2006-2013) & YZ125/250 (2006-2015); WR250F/WR250X/WR250R (2007-2014); WR450F 2007-2015)
Q: I got a 13 kxf 450, anyway are these rubber mounted or solid
Over 3 years ago
I have been having major problems, the stock ones bend with even a slight tip over. I got twinwalls and replaced the mounts with solid ones, but today was first ride with them and tweaked them twice just dropping it in a turn, the solid mounted ones i bought just replace the rubber cones cones with steel, they are garbage, anyway I am likely gonna give these a try, I see kawi can use stock triple clamps but don't see a year they will work on a 2013 model I assume????
MotoSport Staff Expert
Over 3 years ago
A: Yes the Ride Engineering Bar Mounts will work on your 2013 KX450F. Just be sure to correctly select the Year/Make/Model of your bike before ordering so we can be sure to send you the correct mounts for your bike. Also, feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order. They will not come with cones, they will work with the stock OEM comes or aftermarket solid comes.
Q: In the product description it states "Fits stock triple clamp only" then at the bottom states "Fits Ride Engineering triple clamps only". Which one?
Over 3 years ago
I have a 2004 RM 250 and am using the stock triple clamps. Will this product work?
Expert MotoSport Staff
Over 3 years ago
A: For your 2004 Suzuki RM250 these mounts will fit both the stock and the Ride clamp.
Here is what the holes look like.
Q: Will these fit into the front slot of 2012-2014 KX450F triple clamps?
Over 4 years ago
I am looking to buy a one piece bar mount to stop the twisting of my bars. The description says these will fit stock clamps, BUT will they fit into the forward slot? The front holes are closer together than the back holes. I have a feeling that this won't work and I'm just going to have to buy an entire new triple clamp and bar mounts.
2012-14 Kawasaki KX450 OEM Clamps.
MotoSport Staff Expert
Over 4 years ago
A: This mount should work in either the front or rear holes. It is not a significant enough difference in spacing to effect the mounting of the clamp and the rubber cones compensate for the difference. You should not have any issues running these clamps in the forward mounted position on your bike.
Q: Will a pro taper bar pad fit over these?
Over 8 years ago
Expert MotoSport Staff
Over 8 years ago
A: Yes.
Over 8 years ago
A: Yes the Pro Taper pad fits perfectly over the mount so no issues.
1 - 10 of 11

See all bikes that this part fits...

See Fitments
# Part Numbers
Product Variant Manufacturer Part #
Standard 7/8" Bars CR-BBM78-00
Oversize 1-1/8" Bars MX-BBM00-CA
Oversize 1-1/8" Bars KX-BBM00-CA
1-1/8" For Stock Clamp N/A
1-1/8" For Stock Clamp N/A
Oversize 1-1/8" Bars For Stock Clamp AF-BBM00-CA
Oversize 1-1/8" Bars for Ride Engineering Clamp YZ-BBM00-CA
Standard 7/8" Bars KX-BBM78-00
, Oversize 1-1/8" Bars KT-BBM00-CA
Oversize 1-1/8" Bars AF-BBM85-CA