Wind blew my bike over breaking the old turn signals. Bought these and they fit perfectly and work great.
- 5 reviews
- 3 reviews
- 1 reviews
- 1 reviews
- 0 reviews
These were purchased to replace a back set on my drz 400. If you buy these, please do yourself a favor!....Access to the bulb is by removing a set screw in the housing and sliding that off the stalk. I had an issue with contact intermittently and could not remove the screw even with a hand impact. A little bit of grease on the bulb holder, and some "never seize" on the barrel and screw would have alleviated ever having a problem! Also, make sure you install with little lense vent slot down! (Mine were, but it Is a drz 400s!) Lol! They are very inexpensive, but it was a hassle for me because my bike came due for inspection while I was having this issue and I had to cork the factory ones back on. I think these are said to not be DOT, however, they are quite bright and I've never been questioned! I hope this helps someone!
Had them for about two hours and one of the bulbs busted on the first ride!
Like any aftermarket universal part they take some ingenuity to install and wire up but they are pretty bright and look decent on the bike.
Very bright, two wire design. Body is high impact plastic with dense rubber stem.
The bottom of these are a soft rubber and they are designed to bend instead of break which is fine however, if you tighten them down too much they will pop off the bolt they are mounted to. There is just a small wide bracket that goes up inside them like a T shape and you cannot tighten them much or else they just pop off. Other than that they work.
i love it
Got this set to replace the original lights on my 08' Spyder. They fit properly and are low profile, good deal for the price!
Motosport has amazing products at great prices. I purchased Cat Eye turn signals that were priced 15% lower than most other competitors for a similar product. I received a quality product, which was shipped immediately and arrived sonner than I expected thru normal shipping.
I will definitely purchase from Motosport again and advise my fellow riderws to do the same thing.
- Answered: 7
- Not Yet: 0
Question asked by maltd
Question:Q: LEDQuestion asked 2 years 2 months agoAre these LED? Thanks
Question answered by AlexUser's contributor status: Top 25Question answered 2 years 2 months agoAnswer: A: They are not. They are filament.
Question asked by BenjiTheThird
Question:Q: How many turn signals does it come with? Just 1? 2?Question asked Over 4 years ago
Question answered by MotoSportExpertUser's contributor status: MotoSport Staff ExpertQuestion answered Over 4 years agoAnswer: A: The CatEye Mini Turn Signal are Sold in pairs with mounting hardware.
Question asked by Billyho
Question:Q: What is the Watts and Volts?Question asked Over 4 years agoWhat is the Watts and Volts for these turn signals?
Question answered by MotoSportExpertUser's contributor status: Expert MotoSport StaffQuestion answered Over 4 years agoAnswer: A: The CatEye Mini Turn Signals would be a 12 volt 2 wire.
Question answered by ApriliaApeUser's contributor status:Question answered Over 4 years agoAnswer: A: These are 12volt 23watt lights...very nice easy to install
Question asked by presto
Question:Q: FittingQuestion asked Over 9 years agoi have a 2001 kawasaki zx7r. i was wondering if it came with the mounting stuff for everybike? or what the deal was with that?
Question answered by CpWillysUser's contributor status:Question answered Over 9 years agoAnswer: A: You may have to drill anew hole or find a way to use some existing mount in a different way to get these to work. They may directly bolt up but I'd say its unlikely
Question answered by patrick77User's contributor status: Expert MotoSport StaffQuestion answered Over 9 years agoAnswer: A: This is a univeral fit item. Its your job to make it work.
Question asked by Giovano
Question:Q: Does it fit on CBR 600RR 2006?Question asked Over 10 years agoIs it necessary any adaptor to fix that on this bike?
Question answered by patrick77User's contributor status: MotoSport Staff ExpertQuestion answered Over 10 years agoAnswer: A: These are not bike specific. Mounting hardware is included, I don't believe the CBR needs anything else.
Question asked by Drew64
Question:Q: Does it matter what motorcyle and model I select?Question asked Over 11 years agoThe ones in the picture look like what I need, does the bike I select have an impact on leg length, wire length, etc? I ride a 2004 Hyosung GT250
Question answered by DrewKlannUser's contributor status: Expert MotoSport StaffQuestion answered Over 11 years agoAnswer: A: No it doesn't matter what bike you profile the signals will be the same size, shape and everything.
Question answered by CpWillysUser's contributor status:Question answered Over 11 years agoAnswer: A: This is a universal part so there it is one size fits all. Typically it is enough to wire into your factory turn signal connectors.
Question asked by CJAY
Question:Q: What is the actual size of the lense and length of the leg.Question asked Over 11 years ago
Question answered by Darren977User's contributor status: Expert MotoSport StaffQuestion answered Over 11 years agoAnswer: A: Well I don't know for sure (since there are no dimensions/lengths to be found anywhere), but I'd probably say that the lense is between 1.5 to 2 inches accross and the stalk is somewhere around .75 inches in length.
Question answered by CpWillysUser's contributor status:Question answered Over 11 years agoAnswer: A: The lens is 1.8" and the entire part is 3.5" long.