Why Your 2018 Triumph Bonneville T100 900 Is Using More Fuel Than It Used To

Shop parts for a 2018 Triumph Bonneville T100 - 900cc Motorcycle.

The 2018 Triumph Bonneville T100 900 is a modern machine: a liquid-cooled, four-stroke 900cc parallel twin with electronic fuel injection, electronic ignition, and chain final drive. That configuration shapes the diagnosis. There is no choke to leave partly engaged and no float bowl to stick, so the usual carburetor-era suspects do not apply here. Instead, the engine control unit decides how much fuel to deliver based on sensor inputs — and when one of those inputs drifts, consumption climbs.

Start by Confirming the Change Is Real

Before chasing a mechanical cause, confirm the change is real. Fill the tank to the same level each time, note the odometer or reset the trip meter, ride normally, then refill and divide the distance covered by the fuel added. A single tank proves very little, since temperature, route, and how full you actually got the tank all skew one sample. Track three or four consecutive fills before drawing conclusions.

It is also worth asking whether the bike is genuinely thirstier or merely reporting that it is. A different tire size, or a sprocket change that alters gearing, affects the relationship between road speed and what the odometer displays. If you have changed either recently, factor that in. Many riders never calculate anything at all — they simply notice they are stopping for fuel more often. That observation is just as valid a starting point.

Conditions and Riding Habits That Quietly Cost Fuel

Not every increase is a fault. Cold weather makes the engine management system enrich the mixture while the engine warms, and it raises rolling resistance in the tires and drivetrain. Winter-blend and ethanol-blended fuels carry less energy per gallon, so the same riding burns more fuel. Headwinds, a passenger, or loaded luggage all add drag and weight that the 900cc twin has to overcome.

Riding style counts too. Hard acceleration, sustained high-speed cruising, and repeated short trips where the engine never fully warms all push consumption upward, as does a long idle warm-up in the driveway — fuel burned, zero distance covered. If your commute or your typical route has changed, that alone can explain a noticeable drop in range.

Rolling Resistance and Drag: Tires, Brakes, and the Chain

Underinflated tires are the most common and most easily corrected cause of poor fuel economy on any motorcycle. Check pressures when the tires are cold, against the specification for the load you are actually carrying.

A brake caliper that does not fully release creates constant drag. After a ride, carefully feel each brake disc; one that is noticeably hotter than the others, without you having used that brake heavily, points to a sticking piston. Because this Bonneville is chain-driven, the final drive deserves attention as well. A chain that is dry, rusty, or adjusted too tight robs power and increases fuel consumption while accelerating wear on sprockets and bearings. Clean it, lubricate it, and set slack to specification.

Air Intake and Ignition Quality

An engine needs the right proportions of air, fuel, and spark. A clogged air filter restricts airflow and produces a rich mixture that wastes fuel, so inspect it and replace it if it is dirty or degraded, particularly if you ride in dusty conditions.

Spark plugs matter more than many riders expect. Worn, fouled, or incorrectly gapped plugs fail to ignite the mixture cleanly, so some of the fuel you paid for leaves the engine unburned. A healthy plug reads light tan or grey; heavy black soot suggests a rich condition worth investigating further. The 2018 T100 uses electronic ignition, so there are no contact points to wear or drift out of adjustment — that particular old-bike cause does not apply.

Fuel Injection: Sensors, Injectors, and Leaks

On a fuel-injected Bonneville, the control unit fuels the engine according to sensor data, so a sensor reporting incorrectly can make the bike run rich with no obvious symptom. The oxygen sensors in the exhaust provide the primary feedback for closed-loop fueling; as one ages or fails, the system can fall back to a richer mixture. A coolant temperature sensor that tells the ECU the engine is colder than it really is has a similar effect, since cold engines are deliberately fueled rich.

Injectors can be a factor too. A dirty or partially clogged injector sprays poorly, and a leaking one dribbles fuel when it should be shut. This parallel twin uses a throttle body per cylinder, so throttle bodies that have drifted out of synchronization cause uneven running and wasted fuel. Stored fault codes may point straight at the problem, which makes having the ECU read a sensible early step. Finally, check for fuel leaks; a weeping line, fitting, or tank seam is both a consumption issue and something to address promptly.

Engine Condition and Operating Temperature

General engine wear reduces efficiency. As compression falls through ring or valve sealing wear, the engine makes less power from the same fuel, so you open the throttle further to hold your pace. Valve clearances that have tightened out of specification contribute to the same problem. These are gradual issues, but they show up as a slow, persistent decline that no amount of tuning will fix.

Because the T100 900 is liquid-cooled, its thermostat is worth considering. One stuck open keeps the engine from reaching full operating temperature, and a cold engine runs rich. If the temperature reading sits unusually low, or the bike never seems to warm properly, that is a clue.

Modifications That Upset the Fueling

An aftermarket exhaust or a high-flow air filter fitted without matching changes to the fuel map can leave the engine running rich, especially at the low and mid throttle openings where most street riding happens. If mileage dropped right after a modification, that modification is the prime suspect. The answer is not necessarily to remove the part, but to have the fueling corrected to suit it.

When to Hand It to a Mechanic

Some symptoms point beyond routine maintenance. A strong fuel smell, black exhaust smoke, heavily sooted spark plugs, rough running alongside the mileage drop, or a dashboard warning light (if your bike has one) all suggest something deeper than tire pressure or a dirty filter. The same is true if you have worked through the basic checks and consumption is still high. Describe what you have observed — when the change began, how you measured it, and any symptoms that came with it — and let a technician read the fault codes and test the sensors directly.

Related Shopping Categories

Shop Fuel System Parts for a 2018 Triumph Bonneville T100 - 900cc Motorcycle.

Shop Air Filters for a 2018 Triumph Bonneville T100 - 900cc Motorcycle.

Shop Tires for a 2018 Triumph Bonneville T100 - 900cc Motorcycle.

Shop Brake Parts for a 2018 Triumph Bonneville T100 - 900cc Motorcycle.

Shop Spark Plugs for a 2018 Triumph Bonneville T100 - 900cc Motorcycle.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.