What Type of Oil Does a 2018 Polaris Sportsman 570 Take?
Shop parts for a 2018 Polaris Sportsman 570 ATV.
Four-Stroke Engine Oil Is the Starting Point
The 2018 Polaris Sportsman 570 is powered by a liquid-cooled, single-cylinder four-stroke engine, which immediately narrows the answer: this quad takes a four-stroke engine oil, not a two-stroke premix and not an injection oil. There is no reservoir feeding the combustion chamber and nothing to mix into the fuel. What the 570 does have is a hardworking single that spends much of its life at low speed under load, and that reality shapes which oil belongs in the crankcase.
Powersports-specific oil is the sensible default here rather than an automotive formula. Motorcycle and ATV oils are blended with additive packages and friction characteristics intended for small, high-output engines and for drivetrains that may share oil with a clutch. Even where a machine’s belt drive runs dry, as it does on this Polaris, a JASO MA or MA2 rated oil remains a widely used and safe choice for utility ATVs in this class.
Viscosity: What Weight Suits a 570
Polaris has historically specified its own branded synthetic formulation for the Sportsman line, and a 5W-50 weight is one of the most commonly cited specifications for Polaris utility engines. That does not mean 5W-50 is the only workable answer. Across the 4x4 utility ATV class generally, 10W-40 and 5W-40 are the two most frequently listed viscosities, with 0W-40 or 5W-40 favored for cold-weather starts and 20W-50 sometimes called out for hot climates or air-cooled engines.
Because the 570 is liquid-cooled, it is less dependent on a heavy hot-weather weight than an air-cooled machine would be. A 5W-40 or 10W-40 synthetic is a reasonable general-purpose pick for moderate climates, while a 0W-40 or 5W-40 makes cold morning starts easier. The first number in a multigrade matters most in winter; the second number matters most when the engine is hot and working.
How the Belt Drive Changes the Oil Conversation
The Sportsman 570 uses a continuously variable, belt-driven automatic transmission, usually called a PVT. The belt itself runs dry, outside the engine oil, so the engine oil is not being asked to lubricate a wet clutch the way it would be on a geared machine with a shared sump. That is a meaningful distinction when comparing oil recommendations across different ATVs.
It does not, however, make automotive oil a good idea. The engine still runs hot, still turns relatively high rpm for its size, and still relies on an additive package designed for a small-displacement powersports engine. Following the manufacturer’s branded oil recommendation, or a quality JASO-rated equivalent in the correct viscosity, keeps things simple and predictable.
Drivetrain Fluids Are Separate From Engine Oil
On an all-wheel-drive utility quad, engine oil is only one of several lubricants. The 2018 Sportsman 570 has a front gearcase and a rear gearcase, and each is serviced on its own, with its own fluid and its own fill and drain points. These are not topped off with engine oil, and mixing them up is a common and avoidable mistake.
The front gearcase on Polaris AWD models typically uses a manufacturer-specific fluid tied to the engagement system, and using the wrong lubricant there can affect how and whether all-wheel drive engages. The rear gearcase and transmission side of the drivetrain commonly call for a gear lubricant along the lines of a hypoid 80W-90 or a manufacturer-branded automatic gear lubricant. Treat each as its own service item.
Heavy Work Is Harder on Oil Than Trail Riding
Plowing snow, dragging a trailer, hauling feed, winching, and crawling through mud all put the 570 in a different category of duty than a casual afternoon trail ride. Slow-speed, high-load operation raises oil temperature, accelerates additive breakdown, and shortens the useful life of the oil in the crankcase.
Water and mud intrusion deserve special attention. If the oil looks milky or frothy, moisture has found its way in, and that oil needs to come out regardless of how many miles are on it. Dusty conditions and repeated water crossings are the classic reasons to shorten oil change intervals well below whatever a light-use schedule would suggest.
Conventional or Synthetic?
Synthetic oil generally flows better on a cold start and holds up longer under sustained heat, which suits a working utility quad. Conventional oil costs less and remains perfectly serviceable for owners who ride lightly and change oil on a disciplined schedule. A synthetic blend sits between the two. For a machine that plows, tows, or sees mud regularly, the extra cost of a full synthetic is usually easy to justify.
Confirming the Exact Spec for Your Machine
The guidance above reflects what is typical for this class of ATV and for Polaris utility engines, but the precise viscosity, the exact fill quantity, and the specific drivetrain fluid for each gearcase are listed in the owner’s manual for your 2018 Sportsman 570. Checking that page takes a minute and removes any doubt. A dealer parts counter can confirm the same details if the manual is not close at hand. Once you know the spec, matching it with a quality powersports oil is straightforward.
Related Shopping Categories
Shop Oils and Fluids for a 2018 Polaris Sportsman 570 ATV.
Shop Oil for a 2018 Polaris Sportsman 570 ATV.
Shop Air Filters and Oil for a 2018 Polaris Sportsman 570 ATV.
Shop Transmission for a 2018 Polaris Sportsman 570 ATV.
Shop Oil Filters for a 2018 Polaris Sportsman 570 ATV.
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your ATV's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.