What Kind of Oil Keeps a 2015 Polaris Sportsman 570 X2 Running Right

Shop parts for a 2015 Polaris Sportsman 570 X2 ATV.

Start With the Engine: Viscosity That Fits a 570 Single

The 2015 Sportsman 570 X2 is built around a liquid-cooled, fuel-injected 567cc four-stroke single, and that engine’s oil needs sit squarely in the mainstream of modern utility ATV practice. The viscosity most often cited for this engine family is 5W-50, a weight that holds up well under the heat and load a working quad generates. A 10W-40 powersports oil is also a very common choice and is widely used by owners in milder climates. If you ride in genuine cold — single digits and below — a 0W-40 gives you easier cold-start flow, while 20W-50 shows up in some hot-climate recommendations.

The number before the W describes cold-flow behavior; the number after describes how the oil behaves once the engine is at temperature. Getting that second number right matters more on an air-cooled machine than on this liquid-cooled one, but the first number is what determines how much wear happens in the first thirty seconds after a cold start. Your owner’s manual lists the exact viscosity Polaris specifies for this model, and it’s worth a quick look before you buy.

Why the Belt Drive Changes the Oil Conversation

The 570 X2 uses a continuously variable transmission with a belt, and that belt runs dry — it never sees engine oil. That’s a meaningful difference from a quad with a geared gearbox and a wet clutch, where the same oil lubricates the engine, the transmission, and the clutch pack all at once. On those machines, a JASO MA or MA2 rated oil is essentially mandatory, because the friction modifiers in ordinary automotive oil can cause a wet clutch to slip.

On the Sportsman, the clutch that engages the belt is a separate assembly, and the transmission gearcase holds its own lubricant. Even so, a powersports-specific oil remains the smarter pick. These formulations are built to handle the higher sustained rpm, the heat soak of slow-speed work, and the shear that a single-cylinder thumper puts on its oil. Polaris sells its own branded engine oil for this machine, and following the manufacturer’s recommendation is a sound default if you’d rather not sort through the alternatives.

The Other Fluids a 4x4 Quad Needs

Engine oil is only one of several lubricants on this machine, and mixing them up is a common and expensive mistake. A 4x4 utility ATV of this type typically carries:

  • A front differential, which on models with an on-demand all-wheel-drive system uses a specialized fluid rather than a generic gear oil. That fluid is formulated with the friction characteristics the engagement mechanism needs, and substituting a standard hypoid oil can change how — or whether — the front wheels lock in.
  • A rear gearcase or final drive, usually filled with a hypoid gear oil in the 80W-90 range.
  • A transmission gearcase, separate from the engine sump, with its own fill and drain.

Each of these is serviced on its own schedule and checked at its own fill plug. None of them take engine oil, and none of them should be topped off with whatever is left in the jug from your last engine change.

How You Use the Quad Should Shape Your Oil Choice

A Sportsman 570 X2 is a two-up machine with a cargo bed, which means it gets used for real work — hauling, plowing, towing a trailer, running a sprayer. That kind of duty is harder on oil than a casual trail ride. Sustained low-speed, high-load operation raises oil temperature without much airflow, long idle periods let condensation accumulate in the crankcase, and repeated water crossings or deep mud can push moisture past seals.

If your oil comes out looking milky or tan rather than dark and translucent, water has gotten in, and that’s a sign to change it promptly rather than wait for the interval. Cold-weather plowing is another case where the lower number in a multigrade oil earns its keep, since a 5W or 0W flows to the top end far faster on a January morning than a 20W would.

Conventional or Synthetic?

Both will work, and the choice comes down to how you use the machine and what you want to spend. Synthetic oil holds its viscosity better under sustained heat, resists breakdown during long periods of hard work, and flows more readily at low temperatures. Conventional oil costs less and remains perfectly adequate for an owner who rides seasonally and changes oil on a reasonable schedule. A semi-synthetic splits the difference and is a common middle ground. What matters more than the base stock is that the oil carries a powersports rating and the correct viscosity for the conditions you actually ride in.

Change Intervals and Confirming the Exact Spec

Heavy work, dust, mud, and frequent short trips all shorten the useful life of engine oil, and most manufacturers publish a separate, shorter interval for severe service alongside the standard one. Treat the standard interval as a ceiling rather than a target if your quad spends its life on a plow or in the mud.

For the precise viscosity, the exact fill quantity, and the specific fluid each gearcase on your machine takes, the owner’s manual is the authoritative source, and a dealer can confirm it in a minute if the manual has gone missing. That’s a quick check, not a hurdle — the general guidance above will get you to the right shelf, and the manual will tell you exactly which bottle to pick up.

Related Shopping Categories

Shop Oils and Fluids for a 2015 Polaris Sportsman 570 X2 ATV.

Shop Oil for a 2015 Polaris Sportsman 570 X2 ATV.

Shop Air Filters and Oil for a 2015 Polaris Sportsman 570 X2 ATV.

Shop Transmission for a 2015 Polaris Sportsman 570 X2 ATV.

Shop Oil Filters for a 2015 Polaris Sportsman 570 X2 ATV.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your ATV's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.